201833

    FTDI Breakout (FT231X) - USB-SerialConverter light Item number: 201833 This is a basic breakout board for the FTDI FT231X USB to serial IC. Switchable between 3.3V and 5V. Category: Start This is a breakout board for the FTDI FT231XQ USB to serial converter. The pin assignment is compatible with all official Arduinos/Genuinos + Arduino clones (LilyPad, Freeduino...). The FTDI Breakout can provide a 3.3 V (max. 150mA) or 5V (max. 500mA) supply voltage. Alternative: CP2102N-Breakout and CP2102N-Breakout Light with Silabs Chipset Features       Switch for 5V (max 500mA) and 3.3V (max 150mA) operation micro USB connector Overcurrent protection with resettable polyswitch fuse Standard 6 pin FTDI connector with GND, CTS, VCC, TX, RX, DTR Made in Germany               https://shop.watterott.com/FTDI‐Breakout‐FT231X‐USB‐Serial‐Converter‐light/4‐18‐19