CAM-M8Q-Breakout Multi GNSS Module
(GPS, QZSS, GLONASS, BeiDou, Galileo)
Item number: 201880
Category: Start
This is a breakout board with the u-blox CAM-M8Q Multi GNSS Module for GPS, QZSS, GLONASS,
BeiDou and Galileo data.
On the breakout you find the u-blox CAM-M8Q module, a CR1225 battery holder for the backup
battery and two u.Fl connectors.
The u.Fl connectors are connected to the antenna in- and output of the CAM-M8Q.
It has a easy to use UART, SPI and DDC (I2C) interface, so you can use it in different applications.
All pins are brought out as 2,54mm pitch pin header.
Features:
Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
Miniature size and weight with low power consumption
Embedded, omnidirectional and wideband antenna
Industry leading ?167 dBm navigation sensitivity
Optional external antenna
Receiver: 72-Kanel u-blox M8 engine
Updaterate: Single GNSS - up to 18Hz, Dual GNSS up to 10Hz
Power supply: 2,7 - 3,6V
30mA Continuous / 10mA Power Save Mode 1Hz @ 3V
Interfaces: UART, SPI, DDC (I2C)
Timepulse output: 0,25Hz - 10MHz
Protocols : NMEA, UBX binary, RTCM
https://shop.watterott.com/CAM‐M8Q‐Breakout‐Multi‐GNSS‐Module‐GPS‐QZSS‐GLONASS‐BeiDou‐Galileo/4‐18‐19
很抱歉,暂时无法提供与“201880”相匹配的价格&库存,您可以联系我们找货
免费人工找货