HYG400P10LR1B

HYG400P10LR1P/B P-Channel Enhancement Mode MOSFET Feature  Pin Description -100V/-40A RDS(ON)= 42mΩ(typ.) @ VGS = -10V RDS(ON)= 48mΩ(typ.) @ VGS = -4.5V  100% Avalanche Tested  Reliable and Rugged  Lead Free and Green Devices Available (RoHS Compliant) TO-220FB-3L TO-263-2L Applications  Portable equipment and battery powered systems  DC-DC Converters  Motor control. P-Channel MOSFET Ordering and Marking Information Package Code P G400P10 B G400P10 XYMXXXXXX XYMXXXXXX P: TO-220FB-3L B: TO-263-2L Date Code XYMXXXXXX Note: HUAYI lead-free products contain molding compounds/die attach materials and 100% matte tin plateTermiNation finish; which are fully compliant with RoHS. HUAYI lead-free products meet or exceed the lead-Free requirements of IPC/JEDEC J-STD-020 for MSL classification at lead-free peak reflow temperature. HUAYI defines “Green” to mean lead-free (RoHS compliant) and halogen free (Br or Cl does not exceed 900ppm by weight in homogeneous material and total of Br and Cl does not exceed 1500ppm by weight). HUAYI reserves the right to make changes, corrections, enhancements, modifications, and improvements to this pr -oduct and/or to this document at any time without notice. www.hymexa.com 1 V1.0 HYG400P10LR1P/B Absolute Maximum Ratings Symbol Parameter Rating Unit Common Ratings (Tc=25°C Unless Otherwise Noted) VDSS Drain-Source Voltage -100 V VGSS Gate-Source Voltage ±20 V Maximum Junction Temperature 175 °C -55 to 175 °C Tc=25°C -40 A Tc=25°C -120 A Tc=25°C -40 A Tc=100°C -28.3 A Tc=25°C 100 W Tc=100°C 50 W TJ TSTG IS Storage Temperature Range Source Current-Continuous(Body Diode) Mounted on Large Heat Sink Note: IDM Pulsed Drain Current * ID Continuous Drain Current PD Maximum Power Dissipation RJC Thermal Resistance, Junction-to-Case 1.5 °C/W RJA Thermal Resistance, Junction-to-Ambient ** 110 °C/W EAS SinglePulsed-Avalanche Energy *** 270 mJ L=0.3mH * Repetitive rating；pulse width limited by max.junction temperature. ** Surface mounted on 1in2 FR-4 board. *** Limited by TJmax , starting TJ=25°C, L = 0.3mH, VD=-80V, VGS =10V. Electrical Characteristics(Tc =25°C Unless Otherwise Noted) Symbol Parameter Test Conditions HYG400P10LR1 Unit Min Typ. Max VGS=0V,IDS= -250μA -100 - - V VDS= -100V,VGS=0V - - -1 μA - - -5 μA Static Characteristics BVDSS Drain-Source Breakdown Voltage IDSS Drain-to-Source Leakage Current VGS(th) IGSS RDS(ON) TJ=55°C Gate Threshold Voltage VDS=VGS, IDS= -250μA -1 -1.8 -3 V Gate-Source Leakage Current VGS=±20V,VDS=0V - - ±100 nA VGS= -10V,IDS= -20A - 42 58 VGS= -4.5V,IDS=-20A - 48 65 ISD= -20A,VGS=0V - -0.8 -1.3 V - 27 - ns - 37 - nC Drain-Source On-State Resistance mΩ Diode Characteristics VSD* Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge www.hymexa.com ISD=-20A,dISD/dt=100A/μs 2 V1.0 HYG400P10LR1P/B Electrical Characteristics (Cont.) (Tc =25°C Unless Otherwise Noted) Symbol Parameter Test Conditions HYG400P10LR1 Min Typ. Max Unit Dynamic Characteristics RG Gate Resistance VGS=0V,VDS=0V,F=1MHz - 9.8 - Ciss Input Capacitance VGS=0V, - 5402 - Coss Output Capacitance VDS= -25V, - 188 - Crss Reverse Transfer Capacitance Frequency=1.0MHz - 121 - td(ON) Turn-on Delay Time - 11 - Tr Turn-on Rise Time VDD= -50V,RG=2.7Ω, - 36 - td(OFF) Turn-off Delay Time IDS= -20A,VGS= -10V - 162 - - 68 - - 79 - - 15.6 - - 14.1 - Tf Turn-off Fall Time Gate Charge Ω pF ns Characteristics Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge VDS = -50V, VGS= -10V, ID= -20A nC Note: *Pulse test，pulse width ≤ 300us，duty cycle ≤ 2% www.hymexa.com 3 V1.0 HYG400P10LR1P/B Typical Operating Characteristics Figure 2: Drain Current Power Dissipation (w) -ID-Drain Current(A) Figure 1: Power Dissipation Tc-Case Temperature(℃) Tc-Case Temperature(℃) Thermal Zθjc -ID-Drain Current(A) Impedance Figure 4: Thermal Transient Impedance Normalized Transient Figure 3: Safe Operation Area Maximum Effective Transient Thermal Impedance, Junction-to-Case -VDS-Drain-Source Voltage(V) Figure 6: Drain-Source On Resistance -ID-Drain Current(A) RDS(ON)-ON-Resistance(mΩ) Figure 5: Output Characteristics -VDS-Drain-Source Voltage (V) www.hymexa.com -ID-Drain Current(A) 4 V1.0 HYG400P10LR1P/B Typical Operating Characteristics(Cont.) Figure 8: Source-Drain Diode Forward -IS-Source Current (A) Normalized On-Resistance Figure 7: On-Resistance vs. Temperature Tj-Junction Temperature (℃) -VSD-Source-Drain Voltage(V) Figure 9: Capacitance Characteristics Figure 10: Gate Charge Characteristics C-Capacitance(pF) -VGS-Gate-Source Voltage (V) 12 -VDS-Drain-Source Voltage (V) www.hymexa.com QG-Gate Charge (nC) 5 V1.0 HYG400P10LR1P/B Avalanche Test Circuit and Waveforms Switching Time Test Circuit and Waveforms Gate Charge Test Circuit and Waveforms www.hymexa.com 6 V1.0 HYG400P10LR1P/B Device Per Unit Package Type Unit Quantity TO-220FB-3L TO-263-2L Tube Tube 50 50 Package Information TO-220FB-3L COMMON DIMENSIONS SYMBOL www.hymexa.com mm MIN NOM MAX A 4.37 4.57 4.77 A1 1.25 1.30 1.45 A2 2.20 2.40 2.60 b 0.70 0.80 0.95 b2 1.17 1.27 1.47 c 0.40 0.50 0.65 D 15.10 15.60 16.10 D1 8.80 9.10 9.40 D2 5.50 - - E 9.70 10.00 10.30 E3 7.00 - - e 2.54 BSC e1 5.08 BSC H1 6.25 6.50 6.85 L 12.75 13.50 13.80 L1 - 3.10 3.40 ΦP 3.40 3.60 3.80 Q 2.60 2.80 3.00 7 V1.0 HYG400P10LR1P/B TO-263-2L COMMON DIMENSIONS SYMBOL mm MIN NOM MAX A 4.37 4.57 4.77 A1 1.22 1.27 1.42 A2 2.49 2.69 2.89 A3 0 0.13 0.25 b 0.7 0.81 0.96 b1 1.17 1.27 1.47 c 0.3 0.38 0.53 D1 8.5 8.7 8.9 D4 6.6 - - E 9.86 10.16 10.36 E5 7.06 - - e 2.54 BSC H 14.7 15.1 15.5 H2 1.07 1.27 1.47 L 2 2.3 2.6 L1 1.4 1.55 1.7 L4 θ www.hymexa.com 0.25 BSC 0° 5° 8 9° V1.0 HYG400P10LR1P/B Classification Profile Classification Reflow Profiles Profile Feature Preheat & Soak Temperature min (Tsmin) Temperature max (Tsmax) Time (Tsmin to Tsmax) (ts) Average ramp-up rate (Tsmax to TP) Liquidous temperature (TL) Time at liquidous (tL) Peak package body Temperature (Tp)* Time (tP)** within 5°C of the specified classification temperature (Tc) Average ramp-down rate (Tp to Tsmax) Time 25°C to peak temperature Sn-Pb Eutectic Assembly Pb-Free Assembly 100 °C 150 °C 150 °C 200 °C 60-120 seconds 60-120 seconds 3 °C/second max. 3°C/second max. 183 °C 217 °C 60-150 seconds 60-150 seconds See Classification Temp in table 1 See Classification Temp in table 2 20** seconds 30** seconds 6 °C/second max. 6 °C/second max. 6 minutes max. 8 minutes max. *Tolerance for peak profile Temperature (Tp) is defined as a supplier minimum and a user maximum. ** Tolerance for time at peak profile temperature (tp) is defined as a supplier minimum and a user maximum. www.hymexa.com 9 V1.0 HYG400P10LR1P/B Table 1.SnPb Eutectic Process – Classification Temperatures (Tc) Package Volume mm³ Volume mm³ Thickness