SIDELED
Enhanced Thinfilm LED
Lead (Pb) Free Product - RoHS Compliant
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Released
Besondere Merkmale
• Gehäusetyp: weißes SMT Gehäuse, farbloser
klarer Verguss
• Besonderheit des Bauteils: Abstrahlung
parallel zur Platine, deshalb ideal zur
Einkopplung in Lichtleiter
• Wellenlänge: 633 nm (super-red),
625 nm (rot), 617 nm (amber),
606 nm (orange), 590 nm (gelb)
• Abstrahlwinkel: Lambertscher Strahler (120°)
• Technologie: InGaAlP Dünnfilm
• optischer Wirkungsgrad:
41 lm/W (super-red), 49 lm/W (red),
70 lm/W (amber, orange), 43 lm/W (yellow)
• Gruppierungsparameter: Lichtstärke,
Wellenlänge
• Verarbeitungsmethode: für alle
SMT-Bestücktechniken geeignet
• Lötmethode: Reflow Löten
• Vorbehandlung: nach JEDEC Level 2
• Gurtung: Gurtung: 12-mm Gurt mit
2000/Rolle, ø330 mm
• ESD-Festigkeit: ESD-sicher bis 2 kV nach
JESD22-A114-D
• Erweiterte Korrosionsfestigkeit:
Details siehe Seite 9
Features
• package: white SMT package, colorless clear
resin
• feature of the device: radiation direction
parallel to PCB, so an ideal LED for coupling in
light guides
• wavelength: 633 nm (super-red),
625 nm (red), 617 nm (amber),
606 nm (orange), 590 nm (yellow)
• viewing angle: Lambertian Emitter (120°)
• technology: InGaAlP Thinfilm
• optical efficiency: 41 lm/W (super-red),
49 lm/W (red), 70 lm/W (amber, orange),
43 lm/W (yellow)
• grouping parameter: luminous intensity,
wavelength
• assembly methods: suitable for all
SMT assembly methods
• soldering methods: reflow soldering
• preconditioning: acc. to JEDEC Level 2
• taping: 12 mm tape with 2000/reel, ø330 mm
• ESD-withstand voltage: up to 2 kV acc. to
JESD22-A114-D
• Superior Corrosion Robustness:
details see page 9
Anwendungen
• optischer Indikator
• Einkopplung in Lichtleiter
• Hinterleuchtung (LCD, Schalter, Tasten,
Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
• Innenbeleuchtung im Automobilbereich (z.B.
Instrumentenbeleuchtung, u.ä.)
• Markierungsbeleuchtung (z.B. Stufen,
Fluchtwege, u.ä.)
• Signal- und Symbolleuchten
Applications
• optical indicators
• coupling into light guides
• backlighting (LCD, switches, keys, displays,
illuminated advertising, general lighting)
• interior automotive lighting. (e.g. dashboard
backlighting, etc.)
• marker lights (e.g. steps, exit ways, etc.)
• signal and symbol luminaire
2012-03-16
1
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Bestellinformation
Ordering Information
Typ
Emissionsfarbe
Lichtstärke1) Seite 15
Lichtstrom2) Seite 15 Bestellnummer
Type
Color of
Emission
Luminous
Intensity1) page 15
Luminous
Flux2) page 15
IF = 30 mA
IV (mcd)
IF = 30 mA
ΦV (mlm)
Ordering Code
LS A67F-U1AA-1
super-red
450 … 1400
2780 (typ.)
Q65110A4723
LR A67F-U2AB-1
red
560 … 1800
3540 (typ.)
Q65110A4729
LA A67F-V2BB-24
amber
1120 … 2800
6100 (typ.)
Q65111A0513
LO A67F-V2BB-24
orange
900 … 2800
5550 (typ.)
Q65110A4867
LY A67F-U2AB-36
yellow
560 … 1800
3540 (typ.)
Q65110A4722
Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen
Helligkeitsgruppen (siehe Seite 5 für nähere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro
Gurt geliefert. Z.B.: LA A67F-AABB-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen AA, AB,
BA oder BB enthalten ist.
Um die Liefersicherheit zu gewährleisten, können einzelne Helligkeitsgruppen nicht bestellt werden.
Gleiches gilt für die Farben, bei denen Wellenlängengruppen gemessen und gruppiert werden. Pro Gurt wird
nur eine Wellenlängengruppe geliefert. Z.B.: LA A67F-AABB-24 bedeutet, dass auf dem Gurt nur eine der
Wellenlängengruppen -2, -3, -4, -5 oder -6 enthalten ist (siehe Seite 5 für nähere Information).
Z.B.: LS A67F-U1AA-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert
wird.
Um die Liefersicherheit zu gewährleisten, können einzelne Wellenlängengruppen nicht bestellt werden.
Note:
The above Type Numbers represent the order groups which include only a few brightness groups (see page 5
for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each
reel). E.g. LA A67F-AABB-24 means that only one group AA, AB, BA or BB will be shippable for any one reel.
In order to ensure availability, single brightness groups will not be orderable.
In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups
will be shipped on any one reel. E.g. LA A67F-AABB-24 means that only 1 wavelength group -2, -3, -4, -5 or
-6 will be shippable (see page 5 for explanation).
E.g. LS A67F-U1AA-1 means that the device will be shiped within the specified limits as stated on page 4.
In order to ensure availability, single wavelength groups will not be orderable.
2012-03-16
2
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter
Symbol
Symbol
Wert
Value
Einheit
Unit
LS, LR, LY
LA, LO
Betriebstemperatur
Operating temperature range
Top
– 40 … + 100
°C
Lagertemperatur
Storage temperature range
Tstg
– 40 … + 100
°C
Sperrschichttemperatur
Junction temperature
Tj
+ 125
°C
Durchlassstrom
Forward current
(TS=25°C)
IF
50
mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.1, TS=25°C
IFM
100
mA
Sperrspannung3) Seite 15
Reverse voltage3) page 15
(TS=25°C)
VR
12
V
2012-03-16
3
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Kennwerte
Characteristics
(TS = 25 °C)
Bezeichnung
Parameter
Wellenlänge des emittierten Lichtes
Wavelength at peak emission
IF = 30 mA
Dominantwellenlänge5) Seite 15
Dominant wavelength5) page 15
IF = 30 mA
Symbol
Symbol
Werte
Values
Einheit
Unit
LS
LR
LA
LO
LY
(typ.)
λpeak
645
634
624
610
597
nm
(min.)
(typ.)
(max.)
λdom
633
±6
625
±5
617*
–5/+7
606*
–6/+3
590*
–7/+5
nm
Spektrale Bandbreite bei 50 % Irel max
Spectral bandwidth at 50 % Irel max
IF = 30 mA
(typ.)
∆λ
15
16
18
17
18
nm
Abstrahlwinkel bei 50 % IV (Vollwinkel)
Viewing angle at 50 % IV
(typ.)
2ϕ
120
120
120
120
120
Grad
deg.
Durchlassspannung6) Seite 15
Forward voltage6) page 15
IF = 30 mA
(min.)
(typ.)
(max.)
VF
VF
VF
1.80
2.0
2.40
1.80
2.0
2.40
1.80
2.0
2.40
1.80
2.0
2.40
1.95
2.05
2.55
V
V
V
Sperrstrom
Reverse current
VR = 12 V
(typ.)
(max.)
IR
IR
0.2
10
0.2
10
0.2
10
0.2
10
0.2
10
µA
µA
Temperaturkoeffizient von λpeak
Temperature coefficient of λpeak
IF = 30 mA; –10°C ≤ T ≤ 100°C
(typ.)
TCλpeak
0.15
0.14
0.14
0.12
0.12
nm/K
Temperaturkoeffizient von λdom
Temperature coefficient of λdom
IF = 30 mA; –10°C ≤ T ≤ 100°C
(typ.)
TCλdom
0.05
0.07
0.08
0.08
0.10
nm/K
Temperaturkoeffizient von VF
Temperature coefficient of VF
IF = 30 mA; –10°C ≤ T ≤ 100°C
(typ.)
TCV
-2.5
-2.5
-2.5
-2.5
-2.5
mV/K
Optischer Wirkungsgrad
Optical efficiency
IF = 30 mA
(typ.)
ηopt
41
49
70
70
43
lm/W
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung4) Seite 15
Junction/ambient4) page 15
Sperrschicht/Lötpad
Junction/soldering point
(max.)
Rth JA
400**
K/W
(max.)
Rth JS
180**
K/W
* Einzelgruppen siehe Seite 5
Individual groups on page 5
**Rth(max) basiert auf statistischen Werten
Rth(max) is based on statistic values
2012-03-16
4
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Wellenlängengruppen (Dominantwellenlänge)5)Seite 15
Wavelength Groups (Dominant Wavelength)5) page 15
Gruppe
Group
amber
orange
yellow
min.
max.
min.
max.
2
612
616
600
603
3
616
620
603
606
583
586
nm
4
620
624
606
609
586
589
nm
5
589
592
nm
6
592
595
nm
min.
max.
Einheit
Unit
nm
Helligkeits-Gruppierungsschema
Brightness Groups
Helligkeitsgruppe
Brightness Group
Lichtstärke1) Seite 15
Luminous Intensity1) page 15
IV (mcd)
U1
U2
V1
V2
AA
AB
BA
BB
450 … 560
560 … 710
710 … 900
900 … 1120
1120 … 1400
1400 … 1800
1800 … 2240
2240 … 2800
Lichtstrom2) Seite 15
Luminous Flux2) page 15
ΦV (mlm)
1500
1900
2400
3000
3700
4800
6050
7500
(typ.)
(typ.)
(typ.)
(typ.)
(typ.)
(typ.)
(typ.)
(typ.)
Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus
5 Helligkeitsgruppen.
Einzelne Helligkeitsgruppen sind nicht bestellbar.
Note: The standard shipping format for serial types includes a family group of 5 individual brightness
groups.
Individual brightness groups cannot be ordered.
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: V1-3
Example: V1-3
Helligkeitsgruppe
Brightness Group
Wellenlänge
Wavelength
V1
3
Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe für jede Selektion enthalten.
Note: No packing unit / tape ever contains more than one group for each selection.
2012-03-16
5
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Relative spektrale Emission2) Seite 15
Relative Spectral Emission2) page 15
V(λ) = spektrale Augenempfindlichkeit / Standard eye response curve
Irel = f (λ); TS = 25 °C; IF = 30 mA
OHL02654
100
Ι rel
%
80
Vλ
60
yellow
orange
amber
red
super-red
40
20
0
400
450
500
550
600
650
nm
700
λ
Abstrahlcharakteristik2) Seite 15
Radiation Characteristic2) page 15
Irel = f (ϕ); TS = 25 °C
40˚
30˚
20˚
10˚
0˚
ϕ
50˚
OHL01660
1.0
0.8
0.6
60˚
0.4
70˚
0.2
80˚
0
90˚
100˚
1.0
2012-03-16
0.8
0.6
0.4
0˚
20˚
6
40˚
60˚
80˚
100˚
120˚
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Durchlassstrom2) Seite 15
Forward Current2) page 15
IF = f (VF); TS = 25 °C
IF
Relative Lichtstärke2) 7) Seite 15
Relative Luminous Intensity2) 7) page 15
IV/IV(30 mA) = f (IF); TS = 25 °C
OHL02665
10 2
mA
OHL02812
10 1
IV
IV (30 mA)
10 0
10
yellow
amber, orange
super red, red
1
5
10 -1
5
10 0
1.5
1.7
1.9
2.1
10 -2 0
10
2.3 V 2.5
5
10 1
VF
IF
Relative Vorwärtsspannung2) Seite 15
Relative Forward Voltage2) page 15
∆VF = VF - VF(25 °C) = f (Tj); IF = 30 mA
0.25
V
mA 10 2
Relative Lichtstärke2) Seite 17
Relative Luminous Intensity2) page 17
IV/IV(25 °C) = f (Tj); IF = 30 mA
IV
OHL02667
IV (25 ˚C)
2.0
∆VF
yellow
0.15
1.5
0.1
0.05
1.0
0
super red
amber
red
orange
-0.05
0.5
-0.1
-0.15
-0.2
-60 -40 -20 0
0
-60 -40 -20 0
Tj
20 40 60 ˚C 100
Tj
2012-03-16
20 40 60 ˚C
7
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Maximal zulässiger Durchlassstrom
Max. Permissible Forward Current
I F = f (T )
IF
OHL02705
60
mA
50
TS
40
TA
30
20
10
TA temp. ambient
TS temp. solder point
0
0
20
60
40
80 ˚C 100
T
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 85 °C
OHL02703
0.12
IF A
D=
0.005
0.01
0.02
0.05
0.1
0.10
0.2
0.08
0.5
OHL02704
0.12
IF A
D=
0.10
0.005
0.01
0.02
0.05
0.1
0.2
0.08
0.5
0.06
0.06
1
1
0.04
0.04
0.02
tP
D= T
0.02
tP
tP
IF
D= T
T
IF
T
0 -5
10 10-4 10-3 10-2 10-1 100 101 s 102
0 -5
10 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2012-03-16
tP
8
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Maßzeichnung8) Seite 15
Package Outlines8) page 15
0.7 (0.028)
4.2 (0.165)
3.8 (0.150)
2.4 (0.094)
2.8 (0.110)
(2.4 (0.094))
1.1 (0.043)
0.9 (0.035)
Anode
(1.4 (0.055))
(R1)
3.8 (0.150)
3.4 (0.134)
(2.9 (0.114))
Cathode marking
2.54 (0.100)
spacing
(0.3 (0.012))
Cathode
(2.85 (0.112))
4.2 (0.165)
3.8 (0.150)
C
A
GPLY6880
Korrosionsfestigkeit besser als EN 60068-2-60 (method 4):
mit erweitertem Korrosionstest: 40°C / 90%rh / 15ppm H2S / 336h
Corrosion robustness better than EN 60068-2-60 (method 4):
with enhanced corrosion test: 40°C / 90%rh / 15ppm H2S / 336h
Kathodenkennung:
Cathode mark:
Gewicht / Approx. weight:
abgeschrägte Ecke
bevelled edge
40 mg
Gurtung / Polarität und Lage8) Seite 15
Method of Taping / Polarity and Orientation8) page 15
Verpackungseinheit 2000/Rolle, ø330 mm
Packing unit 2000/reel, ø330 mm
4 (0.157)
4.25 (0.167)
2012-03-16
8 (0.315)
9
12 (0.472)
1.75 (0.069)
Cathode/Collector Marking
5.5 (0.217)
2 (0.079)
3.95 (0.156)
1.5 (0.059)
OHAY2273
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Empfohlenes Lötpaddesign8) Seite 15
Recommended Solder Pad8) page 15
Reflow Löten
Reflow Soldering
3.0 (0.118)
3.7 (0.146)
1.2 (0.047)
Padgeometrie
für verbesserte
Wärmeableitung
Paddesign
for improved
heat dissipation
Cu-Fläche > 16 mm 2
Cu-area > 16 mm 2
Lötstopplack
Solder resist
OHLPY965
2012-03-16
10
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Lötbedingungen
Soldering Conditions
Vorbehandlung nach JEDEC Level 2
Preconditioning acc. to JEDEC Level 2
Reflow Lötprofil für bleifreies Löten
Reflow Soldering Profile for lead free soldering
(nach J-STD-020D.01)
(acc. to J-STD-020D.01)
OHA04525
300
˚C
T 250
Tp 245 ˚C
240 ˚C
tP
217 ˚C
200
tL
150
tS
100
50
25 ˚C
0
0
50
100
150
200
250
s 300
t
Profile Feature
Pb-Free (SnAgCu) Assembly
Recommendation
Max. Ratings
Ramp-up Rate to Preheat*)
25°C to 150°C
2°C / sec
3°C / sec
Time ts from TSmin to TSmax
(150°C to 200°C
100s
min. 60sec max. 120sec
Ramp-up Rate to Peak*)
180°C to TP
2°C / sec
3°C / sec
Liquidus Temperture TL
217°C
Time tL above TL
80sec
max. 100sec
Peak Temperature TP
245°C
max. 250°C
Time tP within 5°C of the specified
peak temperature TP - 5K
20sec
min. 10sec max. 30sec
Ramp-down Rate*
TP to 100°C
3°K / sec
6°K / sec maximum
Time 25°C to Peak temperature
max. 8 min.
All temperatures refer to the center of the package, measured on the top of the component
* slope calculation ∆T/∆t: ∆t max. 5 sec; fulfillment for the whole T-range
2012-03-16
11
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Barcode-Produkt-Etikett (BPL)
Barcode-Product-Label (BPL)
OSRAM Opto
BIN1: XX-XX-X-XXX-X
LX XXXX
Semiconductors
RoHS Compliant
(6P) BATCH NO: 1234567890
ML Temp ST
2 260 °C R
(1T) LOT NO: 1234567890
(9D) D/C: 1234
Pack: R18
DEMY
022
B_R999_1880.1642 R
(X) PROD NO: 123456789(Q)QTY:
9999
(G) GROUP:
XX-XX-X-X
OHA04563
Gurtverpackung
Tape and Reel
W1
D0
P0
A
N
F
W
E
13.0 ±0.25
P2
Label
P1
Direction of unreeling
Direction of unreeling
W2
Gurtvorlauf: 400 mm
Leader:
400 mm
Gurtende:
Trailer:
160 mm
160 mm
OHAY0324
Tape dimensions in mm (inch)
W
P0
P1
P2
D0
E
F
12 + 0.3
– 0.1
4 ± 0.1
8 ± 0.1
2 ± 0.05
1.5 + 0.1
1.75 ± 0.1
5.5 ± 0.05
(0.157 ± 0.004) (0.315 ± 0.004) (0.079 ± 0.002) (0.059 + 0.004) (0.069 ± 0.004) (0.217 ± 0.002)
Reel dimensions in mm (inch)
A
330 (13)
2012-03-16
W
Nmin
W1
W2 max
12 (0.472)
60 (2.362)
12.4 + 2 (0.488 + 0.079)
18.4 (0.724)
12
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Trockenverpackung und Materialien
Dry Packing Process and Materials
Moisture-sensitive label or print
L
VE
el
LE
.
see
lab
e
H)
nk,
(R
bla cod
y
If
bar
.
dit
RH
mi
%
hu
e
ve
/60
ed ag
˚C
ati
rar ck
rel
30
_
inf pa
<
%
to ak
of
90
urs
d
).
<
ns
(pe
or
urs
d
,
Ho
de
cte
itio
Ho urs
an bje ing
˚C
co
72
nd
Ho urs
5
te
˚C su ss
48
e
Ho
co
±
ce
24 6
da
e
y
40 be
tim
˚C
h
l pro
<
tor
tim e e
or
).
23
tim
at t wilnt
l wit
or
fac
˚C
Flo
s
tim
at
or
ca
at
re.
Flo
d
tha ale el
or
nth
nti
Flo
uiv
du
if: rea
es
l 4 5
Flo
lab
mo
ide
ce
eq
low
g,
l
ve
vic
5a
is
be
de
tin en
24 de , or
pro
ve l
6
Le
e
te
co
,
g:
un wh
Le ve l
ke
r
se
da
ba ed low
ure
Le ve
mo %
ba
e
ba
al
d
Le
ist ure
en ref e
e 10
ure
tim
for
se
ist
ale op se
for >
se
,
Mo
ure
3
ist
is
or .
,
is ha
se
Mo
be
nk
ist
nk
rd
g
-03
Mo
in
n Flo
r-p
RH g,
bla
Mo
ba
TD
po If blathi
%
kin Ca
life s
(if
ar
t.
s
wi
10 ba tor
J-S
thi, va p.
elf
Ye ar ek
_
<
e icat me , C
1
urs
Ye
er
tem ted
Sh
at
ed
low
uir
>
1
WeHo
un
Aft
Indno uir DE
1.
dy
d
e
4 8
ref
y
is
req
2.
JE
bo
e
Mo ore
tim
16
req
:
C/
es dit2b
a)
tim e e
St
or
mi
IP
ed
or g is
tim
vic
b)
e
Hu
en
Flo oror
tim
De
2a kin nc
te
Flo
op
a)
3.
b) baere
Flo or
da
e
l 1 2
Flo
If
al
ref
tim ve
l
2a
4.
se
d
ve l
3
Le
g
an
ve l
Le
Ba
te
ure
Le ve
Le
ist ure
Da
ist ure
Mo
ure
Mo istist
Mo
Mo
Barcode label
N
RS
ins VE
ITI TO
nta
NSUC
TIO
U g coSEND
CO
Ais baRE
TU MI
CThIS
SE
MO
TO
OP
M
RA
OS
Humidity indicator
Barcode label
Please check the HIC immidiately after
bag opening.
Discard if circles overrun.
Avoid metal contact.
Do not eat.
Comparator
check dot
WET
If wet,
examine units, if necessary
bake units
15%
If wet,
examine units, if necessary
bake units
10%
5%
If wet,
parts still adequately dry.
change desiccant
Humidity Indicator
MIL-I-8835
AM
OS R
Desiccant
OHA00539
Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und
einer Feuchteindikatorkarte
Bezüglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im
Kapitel “Gurtung und Verpackung” unter dem Punkt “Trockenverpackung”. Hier sind Normenbezüge, unter
anderem ein Auszug der JEDEC-Norm, enthalten.
Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card.
Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter
“Tape and Reel” under the topic “Dry Pack”. Here you will also find the normative references like JEDEC.
Kartonverpackung und Materialien
Transportation Packing and Materials
Barcode label
el
M
Y
DE
R
18
-1
-1
+Q
P
RO
UP
:
G
4
01
4
98
C:
20
00
D/
00
21
9
(9
D)
21
:
H
12
34
O
5
14
2
11
00
NO
:
O
D
PR
(X
)
D
EM
Y
18
R
-1
:
Q
+
u L
lt S
iT Y
O T6
P 7
L 6
M
P
-1
G
R
O
U
P:
M
RA
OS
00
0
(9
D
)
D
/C
:0
14
4
(G
)
E Bi
D Bi n1
Bi n2 : Pn3 : Q 1: -1 20
M
-2
2 L
0
Te
2a
22 m
3
24 0 p ST
Ad 26 0 C R
C
R ditio 0 C R
07
PA 7 na RT
l TE
C
KV
XT
AR
Muster
TY
:2
)Q
(Q
A
21
00
21
99
8
o M
n O
d
u p
cto to
rs
:1
(X
)
PR
O
D
N
O
:
(1
T)
11
00
LO
T
14
2
N
O
5
R
34
ic
N
O
:
O
S
em
H
12
G
23
S
BA
TC
H
(Q
)Q
TY
:
S S
em R
ic AM
o
n O
d
u p
ct to
o
H
rs
NO
TC
BA
P)
(6
T
LO
(1
T)
<
(6
P)
23
G
e
(G
)
M
u L
lt S
iT Y
O T6
P 7
L 6
E
D
Muster
L
Nns IVEORS
ai IT
ntNS CT
TIO
DU
U g coSE
ON
Ais baRE
IC
TU M
CThIS
SE
NO
:1
E
V
E
L
selab
.
,
H)
nk de
co
(R
bla
r
If
ba
.
ity
id
RH
m
hu
0%
e
e
/6
d
tiv
˚C
re ag
la
re
fra ck
30
_
<
in pa
%
k
s
of
to
90
ea
s
ur
d
).
<
ns
or
te (p
d
Ho ururs s
,
de
g
itio
Ho
an bjec
co
˚C
72
sin
nd
Ho ur
5
te
48
˚C su es
e
Ho
co
±
24 6
da
y
40 be oc
tim e e
˚C
or
th
r
pr
ll
tim
ct
).
O
23
oo r
wi nt
tim e
at
l wi
fa
r
M O
Fl oo
tim
s
at
at le ˚C at
e.
ica
PT
l
Fl
th th va
oo r
ur
O
nt
Fl oo
be
on es ui
if: read
w
ed
l 4 5
Fl
la
m
ide
eq
lo
g,
oc
ve l
vic
is
in en
de
be
24 de or
l 5a6
pr
ve
Le
nt wh
e
te
co
, w,
g:
ve l
Le
ke
r
re
ou
se
da
ba ed flo
Le ve
tu re
m %
ba
e
ba
al
e
Le
r
en re
e
ed
re 10
ois stu ur e
tim
se
fo
al
op se
fo >
,
M oi
r
se
st ur
3
is
is ha
se
M
oi st
nk
be
k,
oo .
03
rd
g
M
oi
in
Fl
an in
RH g,
r-p
bla
DM
ba
Ca
po If bl th
%
kinr
life is
(if
.
ar
ST
f
p.
wi
10 ba to et
Jel r th va
Ye ar ks s
m
_
<
cat m d, C
ed
1
Ye ee ur
iredi
Sh te w, te
at
nt
>
1
W Ho
Af flody
qu In no ire DE
1.
e
ou
4 8
re
ed re
qu JE
2.
bo
ity is
M
or
tim e e
16
re C/
:
es id 2b
r
a)
St
tim
m
IP
ed
oo r
or g is
tim e
vic
b)
e
r
Hu
Fl oo
en
tim
De
2a kin nc
te
Fl
oo r
a)
op
3.
b) ba re
Fl oo
da
e
fe
l 1
Fl
If
al
re
tim ve l 2
4.
se
d
l 2a3
Le ve
g
an
ve l
e
Le
Ba
te
ur e
Le ve
Le
Da oist stur e
ur
M
oi
st ture
M
oi
M ois
M
Q
: -1
M
-2
2 L
0
Te
2a
22 m
3
24 0 p ST
Ad 26 0 C R
C
R0 ditio 0 C R
PA 77 na RT
l TE
CK
VA
XT
R:
Bi
Bi n1
Bi n2 : Pn3 : 120
Barcode label
Packing
Sealing label
Dimensions of transportation box in mm (inch)
Breite / Width
Länge / length
Höhe / height
200 ±5 (7,874 ±0,1968±)
200 ±5 (7,874 ±0,1968)
30 ±5 (1,1811 ±0,1968)
352 ±5 (13,858 ±0,1968±)
352 ±5 (13,858 ±0,1968)
33 ±5 (1,3 ±0,1968)
2012-03-16
13
OHA02044
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Revision History: 2012-03-16
Previous Version: 2010-11-26
Page
Subjects (major changes since last revision)
Date of change
1, 9
additional information
2009-12-07
12
OS-IN-2010-032
2010-10-04
2
Ordering code changed (amber)
2010-11-11
14
package outlines updated
2010-11-26
all
final datasheet created
2010-11-26
11
OS-PCN-2012-008
2012-03-16
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the latest version in the Internet.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components9) page 15 may only be used in life-support devices or systems10) page 15 with the express written approval of
OSRAM OS.
2012-03-16
14
LS A67F, LR A67F, LA A67F, LO A67F, LY A67F
Remarks:
Brightness values are measured during a current pulse of
typical 25 ms, with an internal reproducibility of +/- 8 % and an
expanded uncertainty of +/- 11 % (acc. to GUM with a coverage
factor of k = 3).
2)
Due to the special conditions of the manufacturing processes of
LED, the typical data or calculated correlations of technical
parameters can only reflect statistical figures. These do not
necessarily correspond to the actual parameters of each single
product, which could differ from the typical data and calculated
correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be
changed without any further notice.
3)
Driving the LED in reverse direction is suitable for short term
application.
4)
RthJA results from mounting on PC board FR 4
(pad size ≥ 5 mm 2 per pad)
5)
The dominant wavelength is measured at a current pulse of
typical 25 ms, with an internal reproducibility of +/- 0,5 nm and
an expanded uncertainty of +/- 1 nm (acc. to GUM with a
coverage factor of k=3).
6)
The forward voltage is measured during a current pulse of
typical 8 ms, with an internal reproducibility of +/- 0,05 V and an
expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage
factor of k=3).
7)
In the range where the line of the graph is broken, you must
expect higher brightness differences between single LEDs
within one packing unit
Dimming range for direct current mode max. 5:1
8)
Dimensions are specified as follows: mm (inch)
9)
A critical component is a component used in a life-support
device or system whose failure can reasonably be expected to
cause the failure of that life-support device or system, or to
affect its safety or the effectiveness of that device or system.
10)
Life support devices or systems are intended
(a) to be implanted in the human body,
or
(b) to support and/or maintain and sustain human life.
If they fail, it is reasonable to assume that the health and the life
of the user may be endangered.
Fußnoten:
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
1)
Helligkeitswerte werden während eines Strompulses einer
typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 8 % und einer erweiterten
Messunsicherheit von +/- 11 % gemessen (gemäß GUM mit
Erweiterungsfaktor k = 3).
Wegen der besonderen Prozessbedingungen bei der
Herstellung von LED können typische oder abgeleitete
technische Parameter nur aufgrund statistischer Werte
wiedergegeben
werden.
Diese
stimmen
nicht
notwendigerweise mit den Werten jedes einzelnen Produktes
überein, dessen Werte sich von typischen und abgeleiteten
Werten oder typischen Kennlinien unterscheiden können. Falls
erforderlich, z.B. aufgrund technischer Verbesserungen,
werden diese typischen Werte ohne weitere Ankündigung
geändert.
Die LED kann kurzzeitig in Sperrichtung betrieben werden.
RthJA ergibt sich bei Montage auf PC-Board FR 4
(Padgröße ≥ 5 mm 2 je Pad)
Die dominante Wellenlänge wird während eines Strompulses
einer typischen Dauer von 25 ms, mit einer internen
Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten
Messunsicherheit von +/- 1 nm gemessen (gemäß GUM mit
Erweiterungsfaktor k = 3).
Vorwärtsspannungen werden während eines Strompulses
einer typischen Dauer von 8 ms, mit einer internen
Reproduzierbarkeit von +/- 0,05 V und einer erweiterten
Messunsicherheit von +/- 0,1 V gemessen (gemäß GUM mit
Erweiterungsfaktor k=3).
Im gestrichelten Bereich der Kennlinien muss mit erhöhten
Helligkeitsunterschieden zwischen Leuchtdioden innerhalb
einer Verpackungseinheit gerechnet werden
Dimmverhältnis im Gleichstrom-Betrieb max. 5:1
Maße werden wie folgt angegeben: mm (inch)
Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden
Apparaten oder Systemen eingesetzt wird und dessen Defekt
voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden
Apparates oder Systems führen wird oder die Sicherheit oder
Effektivität dieses Apparates oder Systems beeinträchtigt.
Lebenserhaltende Apparate oder Systeme sind für
(a) die Implantierung in den menschlichen Körper
oder
(b) für die Lebenserhaltung bestimmt.
Falls sie versagen, kann davon ausgegangen werden, dass die
Gesundheit und das Leben des Patienten in Gefahr ist
Published by
OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com
© All Rights Reserved.
2012-03-16
15