CLC401
Fast Settling, Wideband High Gain Monolithic Op Amp
General Description
Features
The CLC401 is a wideband, fast settling op amp designed for
applications requiring gains greater than ±7. Constructed using an advanced complementary bipolar process and a proprietary design, the CLC401 features dynamic performance
far beyond that of typical high speed monolithic op amps. For
example, at a gain of +20, the −3dB bandwidth is 150MHz
and the rise/fall time is only 2.5ns.
The wide bandwidth and linear phase (0.2° deviation from linear at 50MHz) and a very flat gain response makes the
CLC401 ideal for many digital communication system applications. For example, demodulators need both DC coupling
and high frequency amplification-requirements that are ordinarily difficult to meet.
The very fast 10ns settling to 0.1% and the ability to drive
capacitive loads lend themselves well to flash A/D applications. Systems employing D/A converters also benefit from
the settling time and also by the fact that current-to-voltage
transimpedance amplification is easily accomplished.
The CLC401 provides a quick, effective design solution. Its
stable operation over the entire ±7 to ±50 gain range precludes the need for external compensation. And, unlike many
other high speed-op amps, the CLC401's power dissipation
of 150mW is compatible with designs which must limit total
power dissipation or power supply requirements.
The CLC401 is based on National's proprietary op amp
topology that uses current feedback instead of the usual voltage feedback. This unique design has many advantages over
conventional designs (such as settling time that is relatively
independent of gain), yet it is used in basically the same way
(see the gain equations in Figure 1 and Figure 2). However,
an understanding of the topology will aid in achieving the best
performance. The discussion below will proceed for the noninverting gain configuration with the inverting mode analysis
being very similar.
Enhanced Solutions (Military/Aerospace)
SMD Number: 5962-89973
Space level versions also available.
For more information, visit http://www.national.com/mil
■
■
■
■
■
■
−3dB bandwidth of 150MHz
0.1% settling in 10ns
Low power, 150mW
Overload and short circuit protected
Stable without compensation
Recommended gain range, ±7 to ±50
Applications
■
■
■
■
■
■
■
Flash, precision A/D conversion
Photodiode, CCD preamps
IF processors
High speed modems, radios
Line drivers
DC coupled log amplifiers
High speed communications
Pulse Response
1274418
Connection Diagram
1274417
Pinout
DIP & SOIC
© 2011 National Semiconductor Corporation
12744
12744 Version 11 Revision 3
www.national.com
Print Date/Time: 2011/09/21 15:10:53
CLC401 Fast Settling, Wideband High Gain Monolithic Op Amp
OBSOLETE
September 21, 2011
CLC401
1274401
Non-Inverting Frequency Response
Ordering Information
Package
Temperature Range
Industrial
Part Number
Package
Marking
8-pin plastic DIP
−40°C to +85°C
CLC401AJP
CLC401AJP
N08E
8-pin plastic SOIC
−40°C to +85°C
CLC401AJE
CLC401AJE
M08A
www.national.com
2
12744 Version 11 Revision 3
Print Date/Time: 2011/09/21 15:10:53
NSC
Drawing
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Supply Voltage (VCC)
IOUT
Output is short circuit protected to
ground, but maximum reliability will
be maintained if IOUT does not
exceed...
Common Mode Input Voltage
Differential Input Voltage
±7V
+150°C
−40°C to +85°C
−65°C to +150°C
10 sec
Operating Ratings
Thermal Resistance
Package
(θJC)
MDIP
SOIC
60mA
±VCC
5V
(θJA)
125°C/W
145°C/W
70°C/W
65°C/W
Electrical Characteristics
(AV= +20, VCC = ±5V, RL = 100Ω, Rf =1.5kΩ; unless specified).
Symbol
Parameter
Conditions
Ambient Temperature
CLC401AJ
Typ
Max/Min Ratings
(Note 2)
Units
+25°C
−40°C
+25°C
+85°C
VOUT < 2VPP
150
>100
>100
>70
MHz
VOUTt < 5VPP
100
>65
>65
>55
MHz
Frequency Domain Response
SSBW
−3dB Bandwidth
LSBW
Gain Flatness
VOUT < 2VPP
GFPL
Peaking
很抱歉,暂时无法提供与“CLC401AJE”相匹配的价格&库存,您可以联系我们找货
免费人工找货