6A005-G

General Purpose Silicon Rectifiers 6A005-G Thru. 6A10-G Voltage: 50 to 1000 V Current: 6.0 A RoHS Device Features R-6 -Diffused Junction. -Low forward voltage drop. 1.000(25.40) Min. -Low reverse leakage current. -High current capability. Mechanical data 0.360(9.10) 0.340(8.60) -Epoxy: UL 94V-0 rate flame retardant 0.360(9.10) 0.340(8.60) -Case: JEDEC R-6 molded plastic -Polarity: Color band denotes cathode 1.000(25.40) Min. -Weight: 0.07ounce, 2.0 grams -Mounting position: Any 0.052(1.30) 0.048(1.20) Dimensions in inches and (millimeter) Electrical Characteristics (at TA=25°C unless otherwise noted) Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. Parameter Symbol 6A005-G 6A01-G 6A02-G 6A04-G 6A06-G 6A08-G 6A10-G Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current 0.375"(9.5mm) lead length @TA=60°C I(AV) 6.0 A Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 300 A Maximum forward voltage at 6.0A DC VF 1.0 V Maximum reverse current at rated DC blocking voltage TJ=25°C IR 10 TJ=100°C IR 100 CJ 100 pF RθJA 10 °C/W TJ -55 ~ +150 °C TSTG -55 ~ +150 °C μA Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating temperature range Storage temperature range NOTES: 1. Measured at 1.0MHz and applied reverse voltage of 4.0Volts. 2. Thermal resistance from junction to ambient . Company reserves the right to improve product design , functions and reliability without notice. QW-BG014 REV:B Page 1 General Purpose Silicon Rectifiers RATING AND CHARACTERISTIC CURVES (6A005-G Thru. 6A10-G) Fig.2 Maximum Non-repetitive Surge Current Fig.1 Forward Current Derating Curve 400 Peak Forward Surge Current, (A) Average Forward Current, (A) 6.0 4.0 2.0 Single phase Half wave, 60Hz Resistive or inductive load Pulse width 8.3mS single half sinewave (JEDEC Method) 300 200 100 0 0 0 25 50 75 100 125 150 0 10 Ambient Temperature, (°C) Fig.3 Typical Junction Capacitance Fig.4 Typical Forward Characteristics 1000 1000 Instantaneous Forward Current, (A) Capacitacne, (pF) 100 Number of Cycles at 60Hz 100 TJ=25°C f=1MHz 10 0.1 1 10 Reverse Voltage, (V) 100 100 TJ=25°C 10 1.0 Pulse width=300us 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage, (V) REV:B QW-BG014 Page 2 General Purpose Silicon Rectifiers Marking Code Part Number Marking code 6A005-G 6A05 6A01-G 6A1 6A02-G 6A2 6A04-G 6A4 6A06-G 6A6 6A08-G 6A8 6A10-G 6A10 6A005B-G 6A05 6A01B-G 6A1 6A02B-G 6A2 6A04B-G 6A4 6A06B-G 6A6 6A08B-G 6A8 6A10B-G 6A10 6Axx X / XX = Product type marking code Standard Packaging AMMO PACK Case Type R-6 BOX CARTON ( pcs ) ( pcs ) 500 5,000 BULK PACK Case Type R-6 BOX CARTON ( pcs ) ( pcs ) 250 6,000 REV:B QW-BG014 Page 3