ANGLE
SKU:U005
Description
ANGLE is a rotary switch Unit,simply having a 10K potentiometer inside. This unit can be
used for Continuous singal dialing control, such as volume, brightness, or motor speed.
A potentiometer is a manually adjustable, variable resistor with three terminals. Two
terminals are connected to a resistive element, the third terminal is connected to an
adjustable wiper. The position of the wiper determines the output voltage. The out voltage
is captured and converted by AD on ESP32 on portB.
In M5Stack product system, Normally the Grove color indicates the type of communications.
•
•
•
•
Black: Single BUS (AD ,DA ,GPIO)
Red: I2C
Blue:Uart
White: Others(depends)
The Unit's Grove interface is black, specify it is an analog interface that should be connected
to the M5Core's GROVE B interface.
Product Features
•
•
•
•
•
Output voltage range: 0 ~ 2500mV
GROVE interface, support UIFlow and Arduino
Two Lego-compatible holes
Product Size:32.2mm x 24.2mm x 21.7mm
Product weight:5.6g
Include
•
•
1x ANGLE Unit
1x Grove Cable
EasyLoader
EasyLoader is a concise and fast program writer, which has a built-in case program related
to the product. It can be burned to the main control by simple steps to perform a series of
function verification. Please install the corresponding driver according to the device type.
M5Core host Please click here to view the CP210X driver installation tutorial,
M5StickC/V/T/ATOM series can be used without driver)
Example
1. Arduino IDE
The code below is incomplete. To get the complete code, please click here
2. UIFlow
If you want the complete code, please click here
Schematic
PinMap
M5Core(GROVE B)
GPIO36
ANGLE Unit
Sensor Pin
GPIO26
5V
GND
5V
GND
https://docs.m5stack.com/#/en/unit/angle/4-10-20
很抱歉,暂时无法提供与“U005”相匹配的价格&库存,您可以联系我们找货
免费人工找货