FMBS549

FMBS549 FMBS549 NC C E Package: SuperSOT-6 single Mark : .S1 B C C Pin 1 PNP Low Saturation Transistor ThIs device is designed with high current gain and low saturation voltage with collector currents up to 2A continous. Sourced from process PB. Absolute Maximum Ratings* Symbol VCEO VCBO VEBO IC TJ, TSTG Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage TA = 25°C unless otherwise noted Value 30 35 5 1 2 -55 to +150 Units V V V A A °C Collector Current- Continuous - Peak Pulse Current Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150°C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RθJA TA = 25°C unless otherwise noted Characteristics Total Device Dissipation* Thermal Resistance, Junction to Ambient, total *Device mounted on a 1 in2 pad of 2 oz copper. Max 700 180 Units mW °C/W © 1999 Fairchild Semiconductor fmbs549.lwp Rev A PrPB FMBS549 PNP Low Saturation transistor (continued) Electrical Characteristics Symbol Parameter TA = 25°C unless otherwise noted Test Conditions Min Max Units OFF CHARACTERISTICS BVCEO BVCBO BVEBO ICBO IEBO Collector to Emitter Voltage Collector to Base Voltage Emitter to Base Voltage Collector Cutoff Current Emitter Cutoff Current Ic = 10 mA Ic = 100 uA Ie = 100 uA Vcb = 30 V Vcb = 30 V, Ta= 100C Veb = 4 V 30 35 5 100 10 100 V V V nA uA nA ON CHARACTERISTICS hFE DC Current Gain Vce = Vce = Vce = Vce = Vce = 2V, 2V, 2V, 2V, 0.8V, Ic = Ic = Ic = Ic = Ic = 50 mA 500 mA 1A 2A 500 m A 70 100 80 40 100 300 VCE(sat) Collector-Emitter Saturation Voltage Ic = 250 mA, Ic = 500 mA, Ic = 1 A, Ic = 2 A, Ib = 25 mA Ib = 50 mA Ib = 100 mA Ib = 200 mA 200 350 500 750 1.25 1 mV mV mV mV V V VBE(sat) VBE(on) Base-Emitter Saturation Voltage Base-Emitter On Voltage Ic = 1 A, Ib = 100 mA Ic = 1 A, Vce = 2 V SMALL SIGNAL CHARACTERISTICS Output Capacitance Cobo fT Current Gain - Bandwidth Product Vcb = 10V, f = 1MHz Vce = 5 V, Ic = 100mA, f = 100MHz 100 25 pF MHz © 1999 Fairchild Semiconductor fmbs549.lwp Rev A PrPB SuperSOTTM-6 Tape and Reel Data and Package Dimensions SSOT-6 Packaging Configuration: Figur e 1.0 Packaging Description: Customize Label Anti static Cover Tape SSOT-6 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film, adhesive layer, sealant, and anti-static sprayed agent. These reeled parts in standard option are shipped with 3,000 units per 7" or 177cm diameter reel. The reels are dark blue in color and is made of polystyrene plastic (antistatic coated). Other option comes in 10,000 units per 13" or 330cm diameter reel. This and some other options are described in the Packaging Information table. These full reels are individually barcode labeled and placed inside a pizza box (illustrated in figure 1.0) made of recyclable corrugated brown paper with a Fairchild logo printing. One pizza box contains three reels maximum. And these pizza boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. F63TNR Label Embossed Carrier Tape 631 631 SSOT-6 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/Bag Reel Size Box Dimension (mm) Max qty per Box Weight per unit (gm) Weight per Reel (kg) Note/Comments Standard (no f l ow c ode ) 631 631 631 Pin 1 D87Z TNR 10,000 13" 343x343x64 30,000 0.0158 0.4700 TNR 3,000 7" Dia 184x187x47 9,000 0.0158 0.1440 SSOT-6 Unit Orientation 343mm x 342mm x 64mm Intermediate box fo r D87Z Option F63TNR Label F63TNR Label F63TNR Label sa mpl e 184mm x 187mm x 47mm Pizza Box fo r Standar d Opti on F63TNR Label LOT: CBVK741B019 FSID: FDC633N QTY: 3000 SPEC: SSOT-6 Tape Leader and Trailer Configuration: Figur e 2.0 D/C1: D9842 D/C2: QTY1: QTY2: SPEC REV: CPN: N/F: F (F63TNR)3 Carrier Tape Cover Tape Comp onent s Traile r Tape 300mm mi nimum or 75 empty poc kets Lead er Tape 500mm mi nimum or 125 emp ty poc kets 1998 Fairchild Semiconductor Corporation August 1999, Rev. C SuperSOTTM-6 Tape and Reel Data and Package Dimensions, continued SSOT-6 Embossed Carrier Tape Configuration: Figure 3.0 T E1 P0 D0 F K0 Wc B0 E2 W Tc A0 P1 D1 User Direction of Feed Dimensions are in millimeter Pkg type SSOT-6 (8mm) A0 3.23 +/-0.10 B0 3.18 +/-0.10 W 8.0 +/-0.3 D0 1.55 +/-0.05 D1 1.125 +/-0.125 E1 1.75 +/-0.10 E2 6.25 min F 3.50 +/-0.05 P1 4.0 +/-0.1 P0 4.0 +/-0.1 K0 1.37 +/-0.10 T 0.255 +/-0.150 Wc 5.2 +/-0.3 Tc 0.06 +/-0.02 Notes: A0, B0, and K0 dimensions are determined with respect to the EIA/Jedec RS-481 rotational and lateral movement requirements (see sketches A, B, and C). 20 deg maximum Typical component cavity center line 0.5mm maximum B0 20 deg maximum component rotation 0.5mm maximum Sketch A (Side or Front Sectional View) Component Rotation A0 Sketch B (Top View) Typical component center line Sketch C (Top View) Component lateral movement SSOT-6 Reel Configuration: Figure 4.0 Component Rotation W1 Measured at Hub Dim A Max Dim A max Dim N See detail AA 7" Diameter Option B Min Dim C See detail AA W3 Dim D min 13" Diameter Option W2 max Measured at Hub DETAIL AA Dimensions are in inches and millimeters Tape Size 8mm Reel Option 7" Dia Dim A 7.00 177.8 13.00 330 Dim B 0.059 1.5 0.059 1.5 Dim C 512 +0.020/-0.008 13 +0.5/-0.2 512 +0.020/-0.008 13 +0.5/-0.2 Dim D 0.795 20.2 0.795 20.2 Dim N 2.165 55 4.00 100 Dim W1 0.331 +0.059/-0.000 8.4 +1.5/0 0.331 +0.059/-0.000 8.4 +1.5/0 Dim W2 0.567 14.4 0.567 14.4 Dim W3 (LSL-USL) 0.311 – 0.429 7.9 – 10.9 0.311 – 0.429 7.9 – 10.9 8mm 13" Dia July 1999, Rev. C SuperSOTTM-6 Tape and Reel Data and Package Dimensions, continued SuperSOT -6 (FS PKG Code 31, 33) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.0158 1998 Fairchild Semiconductor Corporation September 1998, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench  QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. D