OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Features:
•
•
•
•
2,500 or 3,750 Vrms electrical isolation
Choice of a Single and Dual LED
Phototransistor or Photo Darlington Sensor
Low-cost plastic Dual-In-Line (DIP) package
Agency Approvals:
•
•
UL Certification No: E58730
VDE No: 40026577(OPIA401-404), 40026553(OPIA405-409)
Description:
The OPIA series optocouplers are designed for applications that use an analog output (Phototransistor or
Photodarlington) in a surface mount package. A wide selection of configurations are available. With typical
isolation voltage of 2,500 or 3,750 Volts(RMS), these products meet typical power system isolation requirements.
Theory of operation: The LED transmitter is used to illuminate the Photo sensor providing electrical isolation
between two power systems while maintaining the ability to transmit information from one power system to the
other. In many applications, analog signal levels may be required to be transmitted between two power systems
while maintaining isolation between the power systems up to 3,750 Volts(RMS). A variety of LED and photo
sensor configurations are available depending on the system requirements.
The Current Transfer Ratio (CTR) is determined using the output current and input current for analog photo
sensors. CTR ratios can range from as low as 5 to over 9,000 depending on the device.
CTR =
Photosensor − Current 20mA
=
* 100 = 200
10mA
LED − Current
All SMD products are shipped in a shipping tube with “TR” identified on the end of the part number.
Example: OPI401ATRE is a 4-Pin SMD shipped in tape and reel (TR)
Applications:
•
•
•
•
•
High voltage isolation: 2,500 or 3,750 Volts(RMS)
PCBoard power system isolation
Industrial equipment power isolation
Medical equipment power isolation
Office equipment
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 1 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Package Outline Dimensions and Schematics: Top-View
Package Style C
(SSOP)
Package Style B
(SOP)
Package Style A
(SMD)
Pin #
Part Number
1
2
3
4
OPIA401B
A
K
E
C
OPIA402B
A-K
K-A
E
C
OPIA403B
A
K
E
C
OPIA404B
A
K
E
C
OPIA405C
A
E
C
OPIA406C
A
K
E
C
OPIA407C
A-K
K-A
E
C
OPIA408C
A
K
E
C
OPIA409C
A
K
E
C
OPIA414B
A
K
E
C
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 2 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Analog Output Devices Ordering Information
Part Number
Isolation Voltage
Max. (Vrms)
CTR
Min/Typ/Max
Typ. Tr / Tf (µs)
RL = 100 ohms
Package
Configuration
OPIA401B
3,750
1,000 / - / -
100 / 20
4-Pin SOP
A K—C E (Dar)
OPIA402B
3,750
20 / - 400
4/3
4-Pin SOP
A K, K A—C E
OPIA403B
3,750
600 / 1,600 / 7,500
60 / 53
4-Pin SOP
A K—C E (Dar)
OPIA404B
3,750
50 / - / 600
5/4
4-Pin SOP
A K—C E
OPIA405CxxA
2,500
80 / - / 160
3/5
4-Pin SSOP
A K—C E
OPIA405CxxB
2,500
130 / - / 260
3/5
4-Pin SSOP
A K—C E
OPIA405CxxC
2,500
200 / - / 400
3/5
4-Pin SSOP
A K—C E
OPIA405CxxD
2,500
300 / - / 600
3/5
4-Pin SSOP
A K—C E
OPIA405CxxE
2,500
50 / - / 600
3/5
4-Pin SSOP
AK—CE
OPIA406C
2,500
200 / 2,000 / -
200 / 200
4-Pin SSOP
A K—C E (Dar)
OPIA407CxxE
2,500
80 / - / 600
3/5
4-Pin SSOP
A K, K A—C E
OPIA408C
2,500
200 / 2,000 / -
200 / 200
4-Pin SSOP
A K—C E (Dar)
OPIA409C
2,500
400 / 2,000 -
40 / 10
4-Pin SSOP
A K—C E (Dar)
OPIA414B
3,750
100 / - / 600
4/3
4-Pin SOP
A K—C E
E = Emitter
(Dar) = Photodarlington
Configuration: Definition of Terms
LED Identification—Sensor Identification
Configuration
Information
Packaging
LED
Sensor
A = Anode
K = Cathode
B = Base
C = Collector
Part Number Suffix:
TU = Shipped in Tubes
TR = Tape & Reel
Example: OPIA405CTUE
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 3 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Absolute Maximum Ratings (TA = 25o C unless otherwise noted)
Storage Temperature
OPIA404, OPIA414
OPIA401, OPIA402, OPIA403
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
Operating Temperature
All except the part numbers noted below
OPIA404
OPIA414
Isolation voltage (1 minute)
OPIA400
OPIA401, OPIA402, OPIA403, OPIA404, OPIA414
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
Total Package Power Dissipation
OPIA401, OPIA402, OPIA403, OPIA404, OPIA414
OPIA405
OPIA406, OPIA407, OPIA408, OPIA409
-55° C to +125° C
-40°C to +125° C
-55°C to +150° C
-30° C to +100° C
-55° C to +115° C
-30° C to +115° C
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
5,000 Vrms
3,750 Vrms
2,500 Vrms
170 mW
160 mW
-
260° C
Input Diode
Continuous Forward Current
All except the part number noted below
OPIA414
Peak Forward current (1 µs pulse width, 300 pps)
All except the part number noted below
OPIA414
Reverse Voltage
OPIA401, OPIA403, OPIA404, OPIA405, OPIA406, OPIA409, OPIA414
OPIA402, OPIA407, OPIA408, OPIA409, OPIA410, OPIA412
Power Dissipation
OPIA401, OPIA402, OPIA403, OPIA404
OPIA405, OPIA406, OPIA407, OPIA408, OPIA409
OPIA414
50 mA
10 mA
1A
200 mA
6V
-
70 mW
60 mW
15 mW
Output Phototransistor
Collector-Emitter Voltage
OPIA402, OPIA404
OPIA401, OPIA409
OPIA403
OPIA406, OPIA408
OPIA405, OPIA407, OPIA414
60 V
300 V
35 V
40 V
80 V
Emitter-Collector Voltage
OPIA405, OPIA406, OPIA407, OPIA408
OPIA401
OPIA402, OPIA403, OPIA404
OPIA409
OPIA414
Collector Current
OPIA402, OPIA404, OPIA405, OPIA407, OPIA414
OPIA401, OPIA403
OPIA406, OPIA408
OPIA409
50 mA
150 mA
90 mA
60 mA
Power Dissipation
All except the part numbers noted below
OPIA405, OPIA406, OPIA407, OPIA408, OPI409
150 mW
120 mW
6V
0.1 V
5V
0.3 V
7V
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 4 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Electrical Characteristics
SYMBOL
PARAMETER
MIN
TYP
MAX
-
1.2
1.6
1.1
1.2
1.4
1.75
1.4
1.4
-
-
3.5
3.0
-
-
-
10
-
-
-
5
-
30
30
60
250
-
Collector dark Current
OPIA400, OPIA402, OPIA404
OPIA405, OPIA407
OPIA414
-
-
100
100
100
Collector-emitter Saturation Voltage
OPIA405, OPIA407
OPIA402, OPIA404, OPIA410
OPIA414
-
0.1
0.1
0.1
0.3
0.3
0.2
Cutt-Off frequency
All except those noted below
-
-
-
Rise Time
OPIA402, OPIA414
OPIA405, OPIA407
OPIA404
-
4
3
5
18
18
20
Fall Time
OPIA402, OPIA414
OPIA405, OPIA407
OPIA404
-
3
5
4
18
18
20
UNITS
TEST CONDITIONS
Input Diode
VF
VFM
Forward Voltage
All except those noted below
OPIA404
OPIA405, OPIA406, OPIA407, OPIA408
OPIA401, OPIA409, OPIA414
Peek Forward Voltage
OPIA403
OPIA405
OPI401, OPIA404, OPIA414, OPIA406,
OPIA407, OPIA408, OPIA409
V
IF = 20 mA
IF = 10 mA
IF = 5 mA
IF = 10 mA
I
V
IFM = 500 mA
Reverse Current
IR
Ct
All except those noted below
OPIA404, OPIA407, OPIA408, OPIA414
OPIA405, OPIA406, OPIA409
Terminal Capacitance
All except those noted below
OPIA402, OPIA404, OPIA414
OPIA408, OPIA409
VR = 4 V
µA
VR = 5 V
pf
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1K Hz
V = 0.0 V, f = 1M Hz
Output Phototransistor
ICEO
VCE(SAT)
fC
tR
tF
nA
V
IF = 0 mA, VCE = 20 V
IF = 0 mA, VCE = 80 V
IF = 0 mA, VCE = 50 V
IF = 10 mA, IC = 2 mA
IF = 20 mA, IC = 1 mA
IF = 10 mA, IC = 1 mA
K Hz
VCC = 5 V, IC = 2 mA, RL = 100 Ω
µs
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
µs
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
Continued on Next Page
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 5 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Electrical Characteristics (OPIA400 Series) - Continued from Previous Page
SYMBOL
PARAMETER
MIN
TYP
MAX
UNITS
Collector dark Current
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
-
1.0
1.0
0.4
0.4
Collector-emitter Saturation Voltage
OPIA403
OPIA406, OPIA408, OPIA409
OPIA401
-
0.8
1.0
1.0
1.5
V
1.0
7.0
-
K Hz
Rise Time
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
100
60
200
40
300
300
-
Fall Time
OPIA401
OPIA403
OPIA406, OPIA408
OPIA409
-
20
53
200
10
100
250
-
TEST CONDITIONS
Output PhotoDarlington
ICEO
VCE(SAT)
fC
tR
tF
Cut-Off frequency
OPIA401, OPIA406, OPIA408, OPIA409
OPIA403
µA
µs
µs
IF = 0 mA, VCE = 200 V
IF = 0 mA, VCE = 10 V
IF = 0 mA, VCE = 40 V
IF = 0 mA, VCE = 300 V
IF = 20 mA, IC = 1 mA
IF = 1 mA, IC = 2 mA
IF = 20 mA, IC = 100 mA
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 10 mA, RL = 100 Ω
VCC = 2 V, IC = 20 mA, RL = 100 Ω
VCC = 2 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 2 mA, RL = 100 Ω
VCC = 5 V, IC = 10 mA, RL = 100 Ω
Coupled Characteristics
CTR
Cf
RISO
Current Transfer Ratio
OPIA404
OPIA401
OPIA402
OPIA403
OPIA405(See Table, page 3)
OPIA406, OPIA408
OPIA407
OPIA409
OPIA414
Floating Capacitance
OPIA405, OPIA406, OPIA407,
OPIA408, OPIA409
Isolation resistance
50
1,000
20
600
50
20
0.3
400
100
600
400
7,500
600
2,000
1.0
3.0
2,000
600
%
-
0.6
0.4
1.0
-
pF
5X1010
1011
-
ohm
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 1.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 5.00 mA, VCE = 5.0 V
IF = 1.00 mA, VCE = 2.0 V
IF = 1.00 mA, VCE = 5.0 V
V = 0.0 V, f = 1M Hz
C500V, 40% to 60%RH
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 6 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA401
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 7 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA401
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 8 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA402
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 9 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA402
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 10 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA403
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 11 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA403
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 12 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA404
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 13 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA404
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 14 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA405
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 15 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA405
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 16 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA406
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 17 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA406
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 18 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA407
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 19 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA407
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 20 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA408
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 21 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA408
Forward Current—IF(mA)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 22 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA409
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 23 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA409
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 24 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA414
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 25 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
OPIA414
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 26 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Quality / Reliability Requirements
Failure Criteria
Conditions
± 10%
11 samples after 500Hrs
0 Fail
@ VCE = 5.0VDC, Ta = 70°C
± 10%
50 samples after 96Hrs
0 Fail
@ Max PD, Ta = 25°C
MTTF @ 90% confidence
150,000 Min.
@ 25°C, 25mADC
Moisture Sensitivity Level
MSL 1
per JDEC stnd J-STD-020B
Lead Solderability
0 Fail
per Method 208 of MIL-STD-202.
125°C Min.
DSC test method
Temperature Humidity-Bias
± 20%
85°C, 85%RH, 500Hrs, 80% min Iceo
Temperature Cycle
± 20%
per Method 1010.7 of MIL-STD-883E
High Temperature Storage
± 20%
85°C, 500Hrs
Autoclave
0 Fail
TA = 121°C, Pressure = 15psi, Humidity
= 100%, Time = 96Hrs
Parameter
HTRB D IC(OFF)
HTFB D IC(ON)
Glass Transition of body
Note: This is to be performed when a change occurs to form, fit or function.
Government and Industry Standard
Compliance Requirements
European Union’s Reduction of Hazardous Substances (RoHS) Directive 2002/95/EC
Label Identification
Carrollton, TX, USA
DESCRIPTION:
Size: 3” (7.4 cm) X 2.2” (5.5 cm)
Lettering shall be black on white background.
Format shall be as:
Notes:
1. The DATE CODE is a 4-digit code for date of manufacture where YY is
the last two digits of the year, and WW is week number of manufacture.
2. The LOT I.D. is the manufacturing location lot identification where Y is
the year of manufacture, NNNN is a sequential lot identifier, and DDD is
the day of the year of manufacture. – or use equivalent label format.
MADE IN TAIWAN
OPTEK P/N __OPIA407C-TR__
IIIIIIIIIIIIIIIIIIIII
QTY. ________N/A_________
IIIIIIIIIIIIIIIIIIIII
DATE CODE _____(YYWW)___
IIIIIIIIIIIIIIIIIIIII
LOT I.D. ____(Y-NNNNDDD)__
IIIIIIIIIIIIIIIIIIIII
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 27 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tube Packaging Information:
Tube
Optek's Optocoupler
Part Numbers
Packaging
Quantities
4-PIN
OPIA400D/A
P/H
and 6-PIN
SMD OPIA6XXD/A Series
8-PIN
OPIA8XXD Series and OPID804D
Qty
Inner
Small Carton
Medium Carton
Large Carton
52 x 7 x 7.5
cm
53.5 x 16 x 17.5 cm
53.5 x 30.7 x 17.5
cm
53.5 x 30.7 x 25 cm
Weight
Qty
Weight
Qty
Weight
Gross
Weight
Qty
Weight
Gross
Weight
Qty
Gross
Weight Weig
ht
100
44
3,000
1.40
12,000
6.0
6.5
24,000 12.0
12.5
36,000 18.0
18.5
65
44
1,950
1.50
7,800
6.5
7.0
15,600 12.0
12.5
23,400 18.5
19.0
48
44
1,440
1.44
5,760
6.0
6.5
11,520 12.0
12.5
17,290 18.0
18.5
100
24
6,000
1.60
24,000
6.5
7.0
48,000 13.0
13.5
72,000 19.5
20.0
170
--
10,200
--
M/F
4-PIN and 5-PIN
OPIA401B - OPIA404B, OPIA414B,
SOP OPIA500B
4-PIN
SSOP OPIA405C - OPIA409C
P/H = Pin-Hole Packages (Referred as D = Dual-In-Line Package)
SMD = Standard Surface Mount Packages (Referred as A = 6.5mil SMD)
M/F or SOP = Mini-Flat Packages or Small Outside Packages (Referred as B = 4.40mil SMD w/ 2.54mil LeadSpacing)
SSOP = Shrink SOP Packages (Referred as C = 3.60mil SMD with 1.27mil Lead-Spacing)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 28 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tube Packaging Specifications—SMD— (TU):
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
Quantity: 4-pin (SMD): 100pcs/tube
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Tube Packaging Specifications— SOP (Mini-flats) and SSOP— (TU):
Quantity: 4-pin (SOP): 100pcs/tube
4-pin (SSOP): 170pcs/tube
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 29 of 31
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SMD and SOP—(TR):
Tape Feeder:
Direction:
Quantity: 4-pin (SMD): 1000pcs/Reel
4-pin (SOP): 1000pcs/Reel
4-pin (SSOP): 3000pcs/Reel
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Reel:
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue B 9/2010
Page 30 of 31
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
OPIA401 through OPIA409, OPIA414
SMD, SOP and SSOP Packages
Tape and Reel Packaging Specifications— SSOP—(TR):
.078±0.008
[2.0±0.02]
.157±0.008
[4.0±0.02 ]
Ø.059±0.004
[Ø1.50±0.05]
0.472±0.008 [12.0 ±0.02]
Ø.059±0.004
[Ø1.50±0.05]
0.285±0.008 [7.25 ±0.02]
0.068±0.008
[1.75 ±0.02]
0.088±0.008 [2.25 ±0.02]
.157±0.008]
[4.0±0.02]
.100±0.008
[2.55±0.02]
Direction:
DIMENSIONS ARE IN: INCHES [MILLIMETERS]
TOLERANCE: ± 0.008 INCHES
[± 0.2 MILLIMETERS]
Reel:
Ø.531±0.02
[Ø13.5±0.5]
2.36±0.04 [60±1.0]
Ø7.00±0.04 [Ø178±1.0]
Ø.098±0.02
[2.5±0.5]
.511±0.04 [13±0.5]
Ø.826±0.04 [Ø21±1.0]
.629±0.04 [16.0±0.5]
Quantity: 4-pin (SSOP): 2000pcs/Reel
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue B
9/2010
Page 31 of 31