SR104-TP

SR102 THRU SR104 Features • Lead Free Finish/RoHS Compliant(Note 1)("P" Suffix Designates Compliant. See Ordering Information) • Low Power Loss For High Efficiency • Epoxy Meets UL 94 V-0 Flammability Rating • Moisture Sensitivity Level 1 • Guard Ring Protection 1.0 Amp Schottky Barrier Rectifier 20 to 40 Volts Maximum Ratings DO-41 • Operating Junction Temperature Range: -55⁰C to +125⁰C • Storage Temperature Range: -55⁰C to +150⁰C • Maximum Thermal Resistance: 80°C/W Junction to Ambient MCC Part Number SR102 SR103 SR104 Device Marking Maximum Maximum DC Recurrent Maximum Blocking Peak Reverse RMS Voltage Voltage Voltage 20V 30V 40V SR102 SR103 SR104 14V 21V 28V D 20V 30V 40V A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current IF(AV) Peak Forward Surge Current IFSM 25A 8.3ms,Half Sine VF 0.45V 0.55V 0.60V IFM=1.0A; TJ=25⁰C* IR 0.1mA TJ=25⁰C; Maximum Instantaneous Forward Voltage SR102 SR103 SR104 Maximum DC Reverse Current at Rated DC Blocking Voltage 1.0A TA = 90°C C DIM *Pulse test: Pulse width 300 µsec, Duty cycle 2% Note : 1.High Temperature Solder Exemption Applied, see EU Directive Annex 7a. Rev.3-1-01012019 B D 1/3 A B C D DIMENSIONS INCHES MM MIN MAX MIN MAX 0.160 0.205 4.10 5.20 0.080 0.107 2.00 2.70 0.028 0.035 0.71 0.90 1.000 ----- 25.40 ----- NOTE Φ Φ MCCSEMI.COM SR102 THRU SR104 Curve Characteristics 30 1.0 25 Peak Forward Surge Current (A) Average Forward Current (A) Fig. 1 - Forward Current Derating Curve 1.2 0.8 0.6 0.4 0.2 Resistive or Inductive Load 0.0 0 25 15 10 5 8.3 ms Single Half Sine-Wave 50 100 75 125 1 100 10 Ambient Temperature (°C) Number of Cycles at 60 Hz Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 4 - Typical Instantaneous Forward Characteristics 5 Instantaneous Forward Current (A) TJ=125°C 2 Instantaneous Forward Current (A) 20 0 5 1 0.5 0.2 0.1 TJ=75°C 0.05 TJ=25°C 0.02 0.01 0.0 SR102 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.2 TJ=75°C 0.1 0.05 TJ=25°C 0.02 SR104 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Fig. 5 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Reverse Leakage Characteristics 0.8 10000 TJ=125°C TJ=75°C 10 TJ=25°C SR102 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Rev.3-1-01012019 TJ=125°C 0.5 Instantaneous Forward Voltage (V) 100 1 20 1 Instantaneous Forward Voltage (V) Instantaneous Reverse Leakage Current (μA) 1000 2 0.01 0.0 0.8 10000 Instantaneous Reverse Leakage Current (μA) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current 1000 TJ=125°C 100 TJ=75°C 10 TJ=25°C 1 20 40 60 SR104 80 100 Percent of Rated Peak Reverse Voltage (%) 2/3 MCCSEMI.COM SR102 THRU SR104 Ordering Information Device Packing Part Number-TP Tape&Reel:5Kpcs/Reel Part Number-AP Ammo Packing:5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Rev.3-1-01012019 3/3 MCCSEMI.COM