HB01U05S05YC

HB01UYC www.murata-ps.com 1 Watt Unregulated DC/DC Converters OBSOLETE PRODUCT Last time buy: August 31, 2014. Click Here For Obsolescence Notice of February 2014. FEATURES  RoHS Compliant  High Isolation  2500vrms Isolation Test Voltage  Barrier 100% Production Tested  Low Barrier Capacitance - 10pf  Low Leakage Current - 2ma Max  24-Pin Dip PRODUCT OVERVIEW  Internal Filtering The HB01UYC Series offers a wide selection of input and output voltages to choose from. Each model is offered in a 24-pin DIP package and has an input to output isolation rating of 2500Vrms making it ideal for applications requiring high isolation. The dielectric withstand characteristics of each converter are measured in production to ensure barrier integrity.  Non-Conductive Case The HB01UYC Series is ideal for applications where the output is susceptible to high voltage transients, such as motor drive and industrial process control applications. The low barrier capacitance gives excellent input to output dV/dt characteristics thus protecting the input control circuitry from peak transients appearing on the output. The HB01UYC Series uses a self-oscillating circuit design technology to realize low cost and high performance. The inherent current limiting capability of the high isolation design reduces high current stresses during start-up thus increasing the capacitive load capability while maintaining high reliability. As with all of our DC/DC converters, surface mount construction combined with extensive qualification testing assures low cost without sacrificing quality and reliability.  Low Cost  Low Profile - .375" APPLICATIONS  Industrial Process Control  Dc Motor Drive  Intrinsic Safety Systems  Ground Loop Elimination  Medical Equipment  Portable Test Equipment  Data Acquisition 　 ISO9001 CERTIFIED For full details go to www.murata-ps.com/rohs www.murata-ps.com/support TDC_HB01UYC.C01 Page 1 of 5 HB01UYC 1 Watt Unregulated DC/DC Converters ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. MODEL NOMINAL INPUT VOLTAGE (VDC) RATED OUTPUT VOLTAGE (VDC) RATED OUTPUT CURRENT (mA) INPUT CURRENT MIN LOAD (mA) RATED LOAD (mA) EFFICIENCY (%) HB01U05S05YC HB01U05S12YC HB01U05S15YC 5 5 5 5 12 15 200 83 67 63 63 63 290 290 290 68 70 73 HB01U12S05YC HB01U12S12YC HB01U12S15YC 12 12 12 5 12 15 200 83 67 20 20 20 120 120 114 68 70 73 HB01U15S05YC HB01U15S12YC HB01U15S15YC 15 15 15 5 12 15 200 83 67 25 25 25 98 95 90 68 70 73 HB01U24S05YC HB01U24S12YC HB01U24S15YC 24 24 24 5 12 15 200 83 67 13 13 13 61 60 57 68 70 73 HB01U05D05YC HB01U05D12YC HB01U05D15YC 5 5 5 ±5 ±12 ±15 ±100 ±42 ±34 63 63 63 290 285 275 68 70 73 HB01U12D05YC HB01U12D12YC HB01U12D15YC 12 12 12 ±5 ±12 ±15 ±100 ±42 ±34 20 20 20 123 118 114 68 70 73 HB01U15D05YC HB01U15D12YC HB01U15D15YC 15 15 15 ±5 ±12 ±15 ±100 ±42 ±34 25 25 25 98 95 90 68 70 73 HB01U24D05YC HB01U24D12YC HB01U24D15YC 24 24 24 ±5 ±12 ±15 ±100 ±42 ±34 13 13 13 61 60 57 68 70 73 MIN TYP MAX UNITS 4.5 10.8 13.5 20 5 12 15 24 35 5.5 13.2 16.5 30 VDC VDC VDC VDC mAp-p COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER CONDITIONS INPUT Voltage Range Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation 60 Hz, 10 Seconds 3535 2500 10 10 1 VISO= 240VAC, 60Hz 1 ±3 ±0.02 50 25 ±1.5 BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line See Performance Curves (Min Load =5%) GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign TEMPERATURE Specification Operation Storage Circuit Stress Method TA = +25°C -25 -40 -40 2 ±5 VDC Vrms G pF µArms W % %/°C mVp-p mVrms %/% Vin 160 12 kHz g 2,000,000 Hr +70 +85 +110 °C °C °C www.murata-ps.com/support TDC_HB01UYC.C01 Page 2 of 5 HB01UYC 1 Watt Unregulated DC/DC Converters MECHANICAL Package/Pinout "Y" DIP PACKAGE 1.285±0.010" (32.64±0.25) 2423 22 0.525±0.010" (13.34±0.25) 1514 13 TOP VIEWS HB01UxxyzzYC 1 2 3 10 11 12 0.375±0.005" (9.52±0.13) SIDE VIEWS 0.015±0.005" (0.38±0.13) 0.100±0.010" (2.54±0.25) 0°-15° 0.600" (15.24) 0.020±0.002" (0.51±0.05) 0.125+0.030" -0.000" (3.18+0.76) ( -0.00) NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and logo. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is phosphor bronze; lead finish is 100-300 microinches of matte tin over a barrier layer of 5-40 microinches nickel. END VIEWS PIN CONNECTIONS PIN# SINGLES DUALS 1 2 3 +VOUT -VOUT NU +VOUT Common -VOUT 10 11 12 -VIN NC +VIN -VIN NC +VIN 13 14 15 +VIN NC -VIN +VIN NC -VIN 21 22 23 24 NC NU -VOUT +VOUT NC -VOUT Common +VOUT THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. www.murata-ps.com/support TDC_HB01UYC.C01 Page 3 of 5 HB01UYC 1 Watt Unregulated DC/DC Converters ABSOLUTE MAXIMUM RATINGS ORDERING INFORMATION HB01U xxyzz Y Device Family HB Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant Internal Power Dissipation...................................................0.5 Watt Short Circuit Duration...............................................................5 Min Lead Temperature (soldering, 10 seconds max)..................+300°C* *Note: Refer to Reflow Profile for SMD Models. C TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. VOUT VS LOAD (±5Vout Models) 5.9 6.0 5.7 5.8 Vout (Volts) Vout (Volts) VOUT VS LOAD (5Vout Models) 5.5 5.3 5.6 5.4 5.1 5.2 4.9 5.0 1 20 100 80 Load (mA) 150 200 1 20 12.5 12.6 12.4 12.5 12.4 12.3 12.2 100 30 40 30 34 12.3 12.2 12.1 1 10 30 50 70 12.0 90 1 5 Load (mA) 10 20 Load (mA) VOUT VS LOAD (15Vout Models) VOUT VS LOAD (±15Vout Models) 15.4 15.4 15.3 15.3 Vout (Volts) Vout (Volts) 80 VOUT VS LOAD (±12Vout Models) 12.7 Vout (Volts) Vout (Volts) VOUT VS LOAD (12Vout Models) 60 40 Load (mA) 15.2 15.1 15.2 15.1 15.0 15.0 14.9 14.9 1 10 20 60 40 67 1 Load (mA) 5 10 20 Load (mA) EFFICIENCY VS LOAD Efficiency (%) 80 70 60 50 40 30 20 40 60 80 100 Load (mA) www.murata-ps.com/support TDC_HB01UYC.C01 Page 4 of 5 HB01UYC 1 Watt Unregulated DC/DC Converters Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. ISO 9001 and 14001 REGISTERED This product is subject to the following operating requirements and the Life and Safety Critical Application Sales Policy: Refer to: http://www.murata-ps.com/requirements/ Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2014 Murata Power Solutions, Inc. www.murata-ps.com/support TDC_HB01UYC.C01 Page 5 of 5