MCZ33395EWR2

Freescale Semiconductor Technical Data Document Number: MC33395 Rev 4.0, 2/2007 33395 33395T The 33395 simplifies the design of high-power BLDC motor control design by combining the gate drive, charge pump, current sense, and protection circuitry necessary to drive a three-phase bridge configuration of six N-channel power MOSFETs. Mode logic is incorporated to route a pulse width modulation (PWM) or a complementary PWM output signal to either low-side or high-side MOSFETs of the bridge. Detection and drive circuitry are also incorporated to control a reverse battery protection high-side MOSFET switch. PWM frequencies up to 28 kHz are possible. Built-in protection circuitry prevents damage to the MOSFET bridge as well as the drive IC and includes overvoltage shutdown, overtemperature shutdown, overcurrent shutdown, and undervoltage shutdown. The device is parametrically specified over ambient temperature range of -40°C ≤ TA ≤ 125°C and 5.5 V ≤ VIGN ≤ 24 V supply. DWB SUFFIX EW SUFFIX (Pb-FREE) 98ARH99137A 32-PIN SOICW Features • Drives Six N-Channel Low RDS(ON) Power MOSFETs • Built-In Charge Pump Circuitry • Built-In Current Sense Comparator and Output Drive Current Limiting • Built-In PWM Mode Control Logic • Built-In Circuit Protection • Designed for Fractional to Integral HP BLDC Motors • 32-Pin SOIC Wide Body Surface Mount Package • 33395 Incorporates a