G3VM-351DTR

MOS FET Relays G3VM-351A/D MOS FET Relay Series with 350-V Load Voltage • Upgraded G3VM-2 Series. • Continuous load current of 120 mA. • Dielectric strength of 2,500 Vrms between I/O. • Operating time of 0.3 ms (typical). • RoHS Compliant. ■ Application Examples • Measurement devices • Security systems • Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals PCB terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model G3VM-351A G3VM-351D G3VM-351D(TR) --1,500 Number per stick 100 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-351A 4.58±0.25 G3VM-351D 4.58±0.25 6.4±0.25 7.62±0.25 6.4±0.25 7.62±0.25 3.65 −0.25 0.25 −0.05 +0.1 0.8±0.25 3.65 −0.25 +0.15 +0.15 1.0 min. 2.54±0.25 10.0 max. 4.0 +0.25 −0.2 1.0 min. Note: The actual product is marked differently from the image shown here. 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 7.85 to 8.80 Weight: 0.25 g Note: The actual product is marked differently from the image shown here. 1.2±0.15 Weight: 0.25 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-351A 4 3 G3VM-351D 4 3 1 2 1 2 ■ PCB Dimensions (Bottom View) G3VM-351A 2.54 2.54 Four 0.8-dia. holes (0.61) ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-351D 8.3 to 8.8 2.54 (1.52) (0.61) (1.52) 1.3 1.5 MOS FET Relays G3VM-351A/D 27 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current Symbol IF IFP 50 1 −0.5 5 125 350 120 Rating Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. LED forward current reduction Δ IF/°C rate LED reverse voltage Connection temperature Output Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature VR Tj VOFF IO Δ ION/°C −1.2 Tj 125 2,500 −40 to +85 Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −55 to +125 °C 260 °C ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 ----------Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF ------1,000 ----Typical 1.15 --30 1 25 35 0.0015 30 0.8 --0.3 0.1 Maximum 1.3 10 --3 35 50 1.0 ------1.0 1.0 Unit V μA pF mA Ω Ω μA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 3 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 RL VDD VOUT IO = 120 mA IF = 5 mA, IO = 120 mA, t < 1 s IF = 5 mA, IO = 120 mA VOFF = 350 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT IF 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 --7.5 ----Typical Maximum 280 25 100 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 28 MOS FET Relays G3VM-351A/D ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 100 240 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) LED forward current vs. LED forward voltage IF - VF 100 Ta = 25°C 30 80 200 160 10 60 120 3 40 80 1 20 40 0.3 0 −20 0 20 40 60 80 100 120 0 −20 0 20 40 60 80 100 120 0.1 0.6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 200 Ta = 25°C IF = 5 mA On-state resistance vs. Ambient temperature RON - Ta IO = 120 mA IF = 5 mA 40 t