G3VM-351G1_10

MOS FET Relays G3VM-351G1 Ultrasensitive MOS FET Relays in 350 V Load series for power savings, SOP Package. • Trigger LED forward current of 1 mA (maximum) facilitates power saving designs and prolonged battery life. • Continuous load current of 100 mA. • RoHS Compliant ■ Application Examples • Broadband systems and Measurement devices • Security systems • Industrial equipment • Battery powered equipment and Amusement machines Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals Surface-mounting terminals Load voltage ( peak value) (See the note.) 350 V Model G3VM-351G1 Number per stick 100 Number per tape --2,500 G3VM-351G1(TR) --- Note: The AC peak and DC value are given for the load voltage. ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-351G1 4.4±0.25 3.9±0.25 2.1 max. 0.15 Note: The actual product is marked differently from the image shown here. 0.4±0.1 2.54±0.25 0.1±0.1 0.6±0.3 7.0±0.4 Weight: 0.1 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-351G1 4 3 4 3 Mold pin mark OMRON logo Pin 1 mark 1 2 1 2 Model name LOT No. Note: The actual product is marked differently from the image shown here. ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-351G1 6 to 6.3 1.2 0.8 2.54 MOS FET Relays G3VM-351G1 181 ■ Absolute Maximum Ratings (Ta = 25°C) Item Input LED forward current Repetitive peak LED forward current LED forward current reduction rate LED reverse voltage Connection temperature Symbol IF IFP Δ IF/°C VR Tj Rating 50 1 −0.5 5 125 350 100 −1.0 125 1,500 −40 to +85 Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement Conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. Output Load voltage (AC peak/DC) VOFF Continuous load current (AC peak/DC) ON current reduction rate Connection temperature IO Δ IO/°C Tϕ Dielectric strength between input and VI-O output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) Ta Tstg --- −55 to +125 °C 260 °C ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 ----------Current leakage when the relay is open ILEAK Capacity between terminals Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF CI-O RI-O tON tOFF ------1,000 ----Typical 1.15 --30 0.4 25 35 1 35 0.8 --1 1 Maximum 1.3 10 --1 35 50 1000 ------5 3 Unit V μA pF mA Ω Ω nA pF pF MΩ ms ms Measurement conditions IF = 10 mA VR = 5 V V = 0, f = 1 MHz 2 3 Note: 2. Turn-ON and Turn-OFF Times IF 1 4 RL VDD VOUT IO = 100 mA IF = 2 mA, IO = 100 mA, t < 1 s IF IF = 2 mA, IO = 100 mA VOFF = 350 V V = 0, f = 1MHz f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 2 mA, RL = 200 Ω, VDD = 20 V (See note 2.) VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum ------− 20 --2 ----Typical Maximum 280 25 80 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 182 MOS FET Relays G3VM-351G1 ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 100 80 60 40 20 0 0 -40 -20 0 20 40 60 80 100 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 100 LED forward current vs. LED forward voltage IF - VF Ta = 2 5 10 1 0.1 0.8 0.9 1.0 1.1 1.2 1.3 1.4 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON 150 40 On-state resistance vs. Ambient temperature RON - Ta Trigger LED forward current I F T (mA) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.0 Trigger LED forward current vs. Ambient temperature IFT - Ta IO = 100mA t < 1s Continuous load current IO (mA) 100 50 0 -50 -100 -150 -3 Ta = 25 IF = 2mA On-state resistance RON (Ω) 30 20 10 0 -2 -1 0 1 2 3 -40 -20 0 20 40 IO = 100mA IF = 2mA t < 1s 60 80 100 -40 -20 0 20 40 60 80 100 On-state voltage VON (V) Ambient temperature Ta ( ) Ambient temperature Ta ( ) Turn ON, Turn OFF time vs. LED forward current tON, tOFF - IF 10 10 Turn ON, Turn OFF time vs. Ambient temperature tON, tOFF - Ta Turn ON, Turn OFF time tON, tOFF (mS) V DD = 20V R L = 200 Ω IF = 2mA Current leakage vs. Ambient temperature I LEAK - Ta Current leakage ILEAK (nA) 100 Turn ON, Turn OFF time tON, tOFF (mS) 10 VOFF= 350 V 1 tOFF tON 1 1 0.1 0.1 V DD = 20V R L = 200 Ω 0.01 0.1 tON tOFF 0.1 -40 0.01 Ta = 25 1 10 100 -20 0 20 40 60 80 100 0.001 -40 -20 0 20 40 60 80 100 LED forward current IF (mA) Ambient temperature Ta ( Ambient temperature Ta ( ) MOS FET Relays G3VM-351G1 183 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 Cat. No. X302-E-1 12/10 Specifications subject to change without notice Printed in USA MOS FET Relays G3VM-351G1