T-1016G

RADSL Transformer Reinforced Insulation Per EN 41003/EN 60950 Schematic Diagram Parameter Turns Ratio (1-3) : (10-7) with 8 & 9 shorted Turns Ratio (2-4) : (10-7) with 8 & 9 shorted Primary Inductance Pins 1-3, All others windings open Leakage Inductance(1) Min. 1 : 3.93 1 : 1.96 25 Max. 1 : 4.17 1 : 2.08 30 .5 5 30 35 0.5 1.0 2.0 Units µH µH µH pF pF ohms ohms ohms VRMS 1 3 2 4 10 8 9 7 Leakage Inductance(2) Interwinding Capacitance(3) Interwinding Capacitance(4) Resistance pins (1-3) Resistance pins (2-4) Resistance pins (7-10) with 8,9 shorted Isolation (Hi-Pot) DC Bias 3000 2 0.5 -60 15 -90 mA dB dB Vp-p dB Physical Dimensions inches (mm) 10 9 8 7 6 Insertion Loss 35 kHz to 1.0 MHz Longitudinal Balance 35 KHz to 650 KHz Signal Voltage (secondary) THD, Total Harmonic Distortion 15 Vp-p @ 100 KHz at (7-10) with 8,9 shorted 1. 2. 3. 4. Tested at 100 KHz & 100 mV (1-3) with 2,4 open 7,8,9,10 shorted Tested at 100 KHz & 100 mV (2-4) with 1,3 open 7,8,9,10 shorted Tested at 100 KHz & 100 mV (1-3) to (10-7) with 8,9 shorted Tested at 100 KHz & 100 mV (2-4) to (10-7) with 8,9 shorted .148 (3.75) 1 2 3 4 5 .079 (2.0) .11 (2.8) .148 (3.75) TYP. .039 (1.00) TYP. .854 (21.7) MAX. .012 (0.30) TYP. .81 (20.6) .1.09 (27.7) .787 (20.0) Suggested Solder Pad Layout .385 (9.77) .827 (21.0) .07 (1.80) RHOMBUS P/N: T-1016G CUST P/N: DATE: 01/02/98 NAME: GLOBESPAN SHEET: 1 of 1 Rhombus Industries Inc. Transformers & Magnetic Products FSCM No. 16714 15801 Chemical Lane, Huntington Beach, CA 92649 Phone: (714) 898-0960 FAX: (714) 896-0971