LS4150GS08

LS4150 www.vishay.com Vishay Semiconductors Small Signal Fast Switching Diode FEATURES • Silicon epitaxial planar diode • Low forward voltage drop • High forward current capability • QuadroMELF package • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • High speed switch and general purpose LINKS TO ADDITIONAL RESOURCES • Use in computer and industrial applications 3D 3D 3D Models MECHANICAL DATA Case: QuadroMELF (SOD-80) Weight: approx. 34 mg Cathode band color: black Packaging codes / options: GS18/10K per 13" reel (8 mm tape), 10K/box GS08/2.5K per 7" reel (8 mm tape), 12.5K/box PARTS TABLE PART LS4150 ORDERING CODE TYPE MARKING CIRCUIT CONFIGURATION REMARKS LS4150GS18 or LS4150GS08 - Single Tape and reel ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT VRRM 50 V VR 50 V tp = 1 μs IFSM 4 A IF 600 mA VR = 0 IF(AV) 300 mA Ptot 500 mW Repetitive peak reverse voltage Reverse voltage Peak forward surge current Forward continuous current Average forward current Power dissipation THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER Thermal resistance junction to ambient air Junction temperature Storage temperature range TEST CONDITION SYMBOL VALUE UNIT On PC board 50 mm x 50 mm x 1.6 mm RthJA 300 K/W Tj 175 °C Tstg -65 to +175 °C Rev. 2.1, 26-Nov-2021 Document Number: 85562 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LS4150 www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. MAX. UNIT IF = 1 mA VF 0.540 0.620 V IF = 10 mA VF 0.660 0.740 V IF = 50 mA VF 0.760 0.860 V IF = 100 mA VF 0.820 0.920 V IF = 200 mA VF 0.870 1 V VR = 50 V IR 100 nA Forward voltage Reverse current Diode capacitance TYP. VR = 50 V, Tj = 150 °C IR 100 μA VR = 0, f = 1 MHz, VHF = 50 mV CD 2.5 pF IF = IR = 10 mA to 100 mA, iR = 0.1 x IR, RL = 100 Ω trr 4 ns Reverse recovery time TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1000 IF - Forward Current (mA) IR - Reverse Current (µA) 100 Scattering Limit 10 1 0.1 VR = 50 V 0.01 0 94 9100 40 80 120 160 100 Scattering Limit 10 1 TJ = 25 °C 0.1 0 200 TJ - Junction Temperature (°C) Fig. 1 - Reverse Current vs. Junction Temperature 94 9162 0.4 0.8 1.2 1.6 2.0 VF - Forward Voltage (V) Fig. 2 - Forward Current vs. Forward Voltage Rev. 2.1, 26-Nov-2021 Document Number: 85562 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 LS4150 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): QuadroMELF (SOD-80) 1.6 (0.063) 1.4 (0.055) 1. 7 (0 .0 gl as 67) s Cathode identification > R3 (R0.118) glass 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 2.5 (0.098) max. 2 (0.079) min. 1.25 (0.049) min. 5 (0.197) ref. 96 12071 Rev. 2.1, 26-Nov-2021 Document Number: 85562 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000