6N135

6N135/6N136 Vishay Semiconductors High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output FEATURES • Isolation test voltages: 5300 VRMS • TTL compatible • High bit rates: 1.0 Mbit/s • High common-mode interference immunity NC A C NC i179081 1 2 3 4 8 7 6 5 C (VCC) B (VB) C (VO) E (GND) • Bandwidth 2.0 MHz • Open-collector output • External base wiring possible • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC DESCRIPTION The 6N135 and 6N136 are optocouplers with a GaAIAs infrared emitting diode, optically coupled with an integrated photo detector which consists of a photo diode and a high-speed transistor in a DIP-8 plastic package. Signals can be transmitted between two electrically separated circuits up to frequencies of 2.0 MHz. The potential difference between the circuits to be coupled should not exceed the maximum permissible reference voltages. AGENCY APPROVALS • UL1577, file no. E52744 system code H or J, double protection • DIN EN 60747-5-5 available with option 1 • CSA 93751 ORDER INFORMATION PART 6N135 6N136 6N135-X007 6N136-X006 6N136-X007 6N136-X009 Note For additional information on the available options refer to option information. REMARKS CTR ≥ 7 %, DIP-8 CTR ≥ 19 %, DIP-8 CTR ≥ 7 %, SMD-8 (option 7) CTR ≥ 19 %, DIP-8 400 mil (option 6) CTR ≥ 19 %, SMD-8 (option 7) CTR ≥ 19 %, SMD-8 (option 9) ABSOLUTE MAXIMUM RATINGS PARAMETER INPUT Reverse voltage Forward current Peak forward current Maximum surge forward current Thermal resistance Power dissipation OUTPUT Supply voltage Output voltage Emitter base voltage Output current Maximum Output current Base current Thermal resistance Power dissipation www.vishay.com 168 (1) TEST CONDITION SYMBOL VR IF VALUE 5.0 25 50 1.0 700 45 - 0.5 to 15 - 0.5 to 15 5.0 8.0 16 5.0 300 100 UNIT V mA mA A K/W mW V V V mA mA mA K/W mW Document Number: 83604 Rev. 1.5, 07-May-08 t = 1.0 ms, duty cycle 50 % t ≤ 1.0 µs, 300 pulses/s IFSM Rth Tamb = 70 °C Pdiss VS VO VEBO IO IB Tamb = 70 °C Pdiss For technical questions, contact: optocoupler.answers@vishay.com 6N135/6N136 High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output ABSOLUTE MAXIMUM RATINGS PARAMETER COUPLER Isolation test voltage (between emitter and detector climate per DIN 50014 part 2, Nov. 74) Pollution degree (DIN VDE 0109) Isolation resistance Storage temperature range Ambient temperature range Soldering temperature (2) Vishay Semiconductors (1) TEST CONDITION SYMBOL VALUE UNIT t = 1.0 s VISO 5300 2.0 VRMS VIO = 500 V, Tamb = 25 °C VIO = 500 V, Tamb = 100 °C RIO RIO Tstg Tamb ≥ 1012 ≥ 1011 - 55 to + 125 - 55 to + 100 260 Ω Ω °C °C °C max. ≤ 10 s, dip soldering ≥ 0.5 mm from case bottom Tsld Notes (1) T amb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (1) PARAMETER INPUT Forward voltage Breakdown voltage Reverse current Capacitance Temperature coefficient, forward voltage OUTPUT Logic low supply current Logic high supply current IF = 1.6 mA, VO = open, VCC = 15 V IF = 0 mA, VO = open, VCC = 15 V IF = 16 mA, IO = 1.1 mA, VCC = 4.5 V IF = 16 mA, IO = 2.4 mA, VCC = 4.5 V IF = 0 mA, VO = VCC = 5.5 V IF = 0 mA, VO = VCC = 15 V f = 1.0 MHz 6N135 6N136 ICCL ICCH VOL VOL IOH IOH CIO 150 0.01 0.1 0.1 3.0 0.01 0.6 1 0.4 0.4 500 1 µA µA V V nA µA pF IF = 1.6 mA IR = 10 µA VR = 5.0 V VR = 0 V, f = 1.0 MHz IF = 1.6 mA VF VBR IR CO ΔVF/ΔTA 5.0 0.5 125 - 1.7 10 1.6 1.9 V V µA pF mV/°C TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT Output voltage, output low Output current, output high COUPLER Capacitance (input to output) Note Tamb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Document Number: 83604 Rev. 1.5, 07-May-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 169 6N135/6N136 Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER TEST CONDITION IF = 16 mA, VO = 0.4 V, VCC = 4.5 V IF = 16 mA, VO = 0.5 V, VCC = 4.5 V PART 6N135 6N136 6N135 6N136 SYMBOL CTR CTR CTR CTR MIN. 7 19 5 15 TYP. 16 35 MAX. UNIT % % % % High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output Current transfer ratio SWITCHING CHARACTERISTICS PARAMETER High to low Low to high TEST CONDITION IF = 16 mA, VCC = 5.0 V, RL = 4.1 kΩ IF = 16 mA, VCC = 5.0 V, RL = 1.9 kΩ IF = 16 mA, VCC = 5.0 V, RL = 4.1 kΩ IF = 16 mA, VCC = 5.0 V, RL = 1.9 kΩ PART 6N135 6N136 6N135 6N136 SYMBOL tPHL tPHL tPLH tPLH MIN. TYP. 0.3 0.2 0.3 0.2 MAX. 1.5 0.8 1.5 0.8 UNIT µs µs µs µs COMMON MODE TRANSIENT IMMUNITY PARAMETER High Low TEST CONDITION IF = 0 mA, VCM = 10 VP-P, VCC = 5.0 V, RL = 4.1 kΩ IF = 0 mA, VCM = 10 VP-P, VCC = 5.0 V, RL = 1.9 kΩ IF = 16 mA, VCM = 10 VP-P, VCC = 5.0 V, RL = 4.1 kΩ IF = 16 mA, VCM = 10 VP-P, VCC = 5.0 V, RL = 1.9 kΩ PART 6N135 6N136 6N135 6N136 SYMBOL |CMH| |CMH| |CML| |CML| MIN. TYP. 1000 1000 1000 1000 MAX. UNIT V/µs V/µs V/µs V/µs SAFETY AND INSULATION RATINGS PARAMETER Climatic classification (according to IEC 68 part 1) Comparative tracking index VIOTM VIORM PSO ISI TSI Creepage distance Clearance distance Creepage distance Clearance distance standard DIP-8 standard DIP-8 400 mil DIP-8 400 mil DIP-8 7 7 8 8 CTI 175 8000 890 500 300 175 TEST CONDITION SYMBOL MIN. TYP. 55/100/21 399 V V mW mA °C mm mm mm mm MAX. UNIT Note As per IEC 60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. www.vishay.com 170 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83604 Rev. 1.5, 07-May-08 6N135/6N136 High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output TYPICAL CHARACTERISTICS Tamb = 25 °C, unless otherwise specified Vishay Semiconductors 20 75 °C 18 16 (VCC = 5 V) IF - LED Current (mA) IO - Output Current (mA) IF = 40 mA IF = 35 mA IF = 30 mA IF = 25 mA IF = 20 mA IF = 15 mA IF = 10 mA IF = 5 mA IF = 1 mA 15 25 °C 0 °C 10 14 12 10 8 6 4 2 0 0 5 10 15 5 0 20992 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 20986 20 VF - LED Forward Voltage VO - Output Voltage (V) Fig. 1 - LED Forward Current vs. Forward Voltage Fig. 4 - Output Current vs. Output Voltage 30 6 at VO = 0.4 V, VCC = 5 V IO - Output Current (mA) IF - LED Current (mA) 5 4 3 2 1 0 - 60 - 40 - 20 IF = 16 mA IF = 10 mA IF = 20 mA 20 10 IF = 5 mA IF = 2 mA IF = 1 mA 0 20 40 60 80 100 120 0 0 20 40 60 80 100 i6n135_04 Tamb - Ambient Temperature (°C) 20987 Tamb - Temperature (°C) Fig. 2 - Permissible Forward LED Current vs. Temperature Fig. 5 - Output Current vs. Temperature tP - Propagation Delay Time (ns) 120 100 900 800 700 600 500 400 300 200 100 0 - 60 - 40 - 20 0 20 40 60 80 100 Tamb - Temperature (°C) tPHL at 1.5 V tPHL at 3 V tPLH at 3 V tPLH at 1.5 V 6N136 at VCC = 5 V IF = 16 mA, RL = 1.9 kΩ Total Power (mW) Detector 80 60 40 Emitter 20 0 0 20 40 60 80 100 i6n135_05 Tamb - Ambient Temperature (°C) i6n135_08 Fig. 3 - Permissible Power Dissipation vs. Temperature Fig. 6 - Propagation Delay vs. Ambient Temperature Document Number: 83604 Rev. 1.5, 07-May-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 171 6N135/6N136 Vishay Semiconductors High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output tP - Propagation Delay Time (ns) 1400 1200 1000 800 tPLH 600 400 tPHL 200 0 - 60 - 40 - 20 0.6 ΔIF/ΔIO/Small Signal Current Transfer Ratio 6N135 at VCC = 5 V IF = 16 mA, RL = 4.1 kΩ (VCC = 5 V, RL = 100 Ω) 0.5 0.4 0.3 0.2 0.1 0 0 20 40 60 80 100 i6n135_11 0 5 10 15 20 25 i6n135_09 Tamb - Temperature (°C) IF/mA Fig. 7 - Propagation Delay vs. Ambient Temperature Fig. 9 - Small Signal Current Transfer Ratio vs. Quiescent Input Current 100 IOH - Collector, IC (nA) 10 VCC = VO = 15 V 1 VCC = VO = 5 V 0.1 0.01 0.001 - 60 - 40 - 20 0 20 40 60 80 100 i6n135_10 Tamb - Temperature (°C) Fig. 8 - Logic High Output Current vs. Temperature Pulse generator Z O = 50 Ω t r ,t f = 5 ns duty cycle 10 % t ≤ 100 µs IF t 1 IF 2 IF Monitor 8 7 6 5 RL 5V VO 5V 1.5 V t 3 100 Ω ı VO CL 15 pF VOL tPHL 4 tPLH i6n135_01 Fig. 10 - Switching Times www.vishay.com 172 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83604 Rev. 1.5, 07-May-08 6N135/6N136 High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output Vishay Semiconductors VCM 10 V IF 1 2 3 4 8 7 6 5 RL VO VO 5V A: IF = 0 mA +VCM 5V 10 % 0V tr tf A B VFF 90 % t 90 % 10 % Pulse generator Z O = 50 Ω t r,t f = 8 ns VO t VOL B: IF = 16 mA t i6n135_02 Fig. 11 - Common-Mode Interference Immunity PACKAGE DIMENSIONS in inches (millimeters) Pin one ID 4 0.255 (6.48) 0.268 (6.81) 5 6 7 8 ISO method A 3 2 1 0.379 (9.63) 0.390 (9.91) 0.030 (0.76) 0.045 (1.14) 4° typ. 0.130 (3.30) 0.150 (3.81) 0.050 (1.27) 0.020 (0.51) 0.018 (0.46) 0.022 (0.56) i178006 0.031 (0.79) 0.300 (7.62) typ. 10° 0.035 (0.89) 0.100 (2.54) typ. 3° to 9° 0.008 (0.20) 0.012 (0.30) 0.230 (5.84) 0.110 (2.79) 0.130 (3.30) 0.250 (6.35) Option 6 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) Option 7 0.300 (7.62) typ. Option 9 0.375 (9.53) 0.395 (10.03 ) 0.300 (7.62) ref. 0.028 (0.7) 0.180 (4.6) 0.160 (4.1) 0.315 (8.0) min. 0.0040 (0.102) 0.0098 (0.249) 0.020 (0.51 ) 0.040 (1.02 ) 0.315 (8.00) min. 0.012 (0.30 ) typ. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) 0.331 (8.4) min. 0.406 (10.3) max. 15° max. 18450 Document Number: 83604 Rev. 1.5, 07-May-08 For technical questions, contact: optocoupler.answers@vishay.com www.vishay.com 173 6N135/6N136 Vishay Semiconductors High Speed Optocoupler, 1 MBd, Phtotdiode with Transistor Output OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 174 For technical questions, contact: optocoupler.answers@vishay.com Document Number: 83604 Rev. 1.5, 07-May-08 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1