LL4151

VISHAY LL4151 Vishay Semiconductors Fast Switching Diode Features • Silicon Epitaxial Planar Diodes • Electrical data identical with the device 1N4151 Applications Extreme fast switches 94 9371 Mechanical Data Case: MiniMELF Glass Case (SOD-80) Weight: approx. 30 mg Cathode Band Color: Black Packaging Codes/Options: GS18 / 10 k per 13" reel (8 mm tape), 10 k/box GS08 / 2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part LL4151 Type differentiation VRRM = 75 V Ordering code LL4151-GS18 or LL4151-GS08 Remarks Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Repetitive peak reverse voltage Reverse voltage Peak forward surge current Repetitive peak forward current Forward current Average forward current Power dissipation VR = 0 tp = 1 µs Test condition Symbol VRRM VR IFSM IFRM IF IFAV PV Value 75 50 2 500 300 150 500 Unit V V A mA mA mA mW Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Junction ambient Junction temperature Storage temperature range Test condition on PC board 50 mm x 50 mm x 1.6 mm Symbol RthJA Tj Tstg Value 500 175 -65 to +175 Unit K/W °C °C Document Number 85559 Rev. 1.6, 06-Apr-04 www.vishay.com 1 LL4151 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Forward voltage Reverse current Breakdown voltage Diode capacitance Reverse recovery time Test condition IF = 50 mA V R = 50 V VR = 50 V, Tj = 150 °C IR = 5 µA, tp/T = 0.01, tp = 0.3 ms VR = 0, f = 1MHz, VHF = 50 mV IF = IR = 10 mA, iR = 1 mA IF = 10 mA, VR = 6 V, iR = 0.1 x IR, RL = 100 Ω Symbol VF IR IR V(BR) CD trr trr 75 2 4 2 Min Typ. 0.88 Max 1 50 50 VISHAY Unit V nA µA V pF ns ns Typical Characteristics (Tamb = 25 °C unless otherwise specified) 100 I R - Reverse Currentı ( µA ) C D - Diode Capacitance ( pF ) 3.0 Scattering Limit 2.5 2.0 1.5 1.0 0.5 0 200 94 9153 10 f = 1 MHz Tj = 25 °C 1 0.1 V R = 50 V 0 40 80 120 160 0.01 94 9151 0.1 1 10 100 Tj - Junction Temperature ( ° C ) V R - Reverse Voltage ( V ) Fig. 1 Reverse Current vs. Junction Temperature Fig. 3 Diode Capacitance vs. Reverse Voltage 1000 I F - Forward Current ( mA ) 100 Tj = 100 ° C 10 Tj = 25 ° C 1 0.1 0 94 9152 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage ( V ) Fig. 2 Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85559 Rev. 1.6, 06-Apr-04 VISHAY Package Dimensions in mm (Inches) LL4151 Vishay Semiconductors Cathode indification 1.5 ± 0.1 (0.06 ± 0.004) 3.5 ± 0.2 (0.14 ± 0.008) 0.47 max. (0.02) Mounting Pad Layout 2.50 (0.098) max 1.25 (0.049) min technical drawings according to DIN specifications Glass case Mini Melf / SOD 80 JEDEC DO 213 AA 96 12070 5 (0.197) ref Document Number 85559 Rev. 1.6, 06-Apr-04 2 (0.079) min www.vishay.com 3 LL4151 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. VISHAY 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 4 Document Number 85559 Rev. 1.6, 06-Apr-04 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1