S9015

S9015 SOT-23 Plastic-Encapsulate Transistors S9015 TRANSISTOR (PNP) SOT-23 FEATURES z Complementary To S9014 1. BASE MARKING: M6 2. EMITTER 3. COLLECTOR MAXIMUM RATINGS (Ta=25℃ unless otherwise noted) Symbol Parameter Value Unit VCBO Collector-Base Voltage -50 V VCEO Collector-Emitter Voltage -45 V VEBO Emitter-Base Voltage -5 V IC Collector Current-Continuous -100 mA PC Collector Power Dissipation 200 mW Thermal Resistance From Junction To Ambient 625 ℃/W Tj Junction Temperature 150 ℃ Tstg Storage Temperature -55～+150 ℃ RΘJA ELECTRICAL CHARACTERISTICS (Ta= 25℃ unless otherwise specified) Typ Symbol ol Test conditions Collector-base breakdown voltage V(BR)CBO IC=-100μA, IE=0 -50 V Collector-emitter breakdown voltage V(BR)CEO IC=-0.1mA,IB=0 -45 V Emitter-base breakdown voltage V(BR)EBO IE=-100μA,IC=0 -5 V Collector cut-off current ICBO VCB=-50V, IE=0 -0.1 μA Emitter cut-off current IEBO VEB=-5V, IC=0 -0.1 μA DC current gain hFE VCE=-5V, IC=-1mA Parameter Min 200 Max Unit 1000 Collector-emitter saturation voltage VCE(sat) IC=-100mA, IB=-10mA -0.3 V Base-emitter saturation voltage VBE(sat) IC=-100mA, IB=-10mA -1 V Transition frequency fT VCE=-5V, IC=-10mA f=30MHz 150 MHz CLASSIFICATION OF hFE Rank L H Range 200-450 400-1000 DN:T20307A0 http://www.microdiode.com Rev:2020A0 Page :1 S9015 Typical Characteristics hFE Static Characteristic -8 COMMON EMITTER Ta=25℃ Ta=100℃ -18uA -6 IC -16uA DC CURRENT GAIN -14uA -12uA -4 Ta=25℃ hFE (mA) -20uA COLLECTOR CURRENT —— IC 1000 -10uA -8uA -6uA -2 100 -4uA COMMON EMITTER VCE= -5V IB=-2uA -0 -0 -2 -4 -6 COLLECTOR-EMITTER VOLTAGE VCEsat COLLECTOR-EMITTER SATURATION VOLTAGE VCEsat (V) -1 —— VCE 10 -0.1 -8 -1 (V) -10 COLLECTOR CURRENT IC VBEsat —— IC -100 (mA) IC -2 -1 BASE-EMITTER SATURATION VOLTAGE VBEsat (V) Ta=25℃ -0.1 Ta=100℃ Ta=25℃ Ta=100℃ β=10 β=10 -0.01 -0.1 -0.2 -1 -10 COLLECTOR CURRENT IC IC -100 -10 COLLECTOR CURRENT —— VBE fT Ta=100℃ (mA) IC —— TRANSITION FREQUENCY fT -10 -100 IC (MHz) 1000 (mA) IC COLLECTOR CURRENT -1 (mA) -100 Ta=25℃ -1 COMMON EMITTER VCE=-5V -0.1 -0.0 -0.2 -0.3 -0.6 -0.9 100 COMMON EMITTER VCE=-5V Ta=25℃ 10 -0.1 -1.2 -1 BASE-EMMITER VOLTAGE VBE (V) Cob/ Cib -10 COLLECTOR CURRENT —— VCB/ VEB PC 250 30 —— IC -100 (mA) Ta f=1MHz IE=0/IC=0 COLLECTOR POWER DISSIPATION PC (mW) 10 C (pF) Ta=25 ℃ Cib CAPACITANCE Cob 1 -0.1 -1 REVERSE VOLTAGE http://www.microdiode.com -10 VR (V) -20 200 150 100 50 0 0 25 50 75 AMBIENT TEMPERATURE Rev:2020A0 100 Ta 125 150 (℃ ) Page :2 S9015 Outlitne Drawing SOT-23 Package Outline Dimensions e Suggested Pad Layout 0.037 0.95 0.037 0.95 L L1 E E1 Symbol A A1 b c D E E1 e L L1 θ Dimensions In Millimeters Min Typ Max 1.00 1.40 0.10 0.35 0.50 0.20 0.10 2.70 2.90 3.10 1.40 1.60 2.4 2.80 1.90 0.10 0.30 0.4 0° 10° Note: 1. Controlling dimension:in/millimeters. 2. General tolerance: ±0.05mm. 3. The pad layout is for reference purposes only. 0.079 2.0 0.035 0.9 0.031 0.8 inches mm Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). http://www.microdiode.com Rev:2020A0 Page :3 S9015 SOT-23 Tape and Reel Packaging Description: SOT-23 parts are shipped in tape. The carrier tape is made from a dissipative (carbon filled) polycarbonate resin. The cover tape is a multilayer film (Heat Activated Adhesive in nature) primarily composed of polyester film,adhesive laye,sealant, and anti-static sprayed agent.These reeled parts In standard option are shipped with 3,000 units per 7" or 17.8cm diameter reel. The reels are clear in color and is made of polystyrene plastic (anti-static coated). 3000 pcs http://www.microdiode.com 7 Inch 45,000 pcs 203×203×195 180,000 pcs 438×438×220 Rev:2020A0 Page :4