FW.92.RNT.M

Meteor Part No: FW.92.RNT.M Description: Penta-band cellular 2G/3G GSM/CDMA/UMTS Flexible Whip Monopole Antenna 850/900/1800/1900/2100MHz Features: Robust Inner Steel Core RP-N-type Male Connector IP65 RoHS Compliant SPE-12-8-090/B/WY 1. Introduction 3 2 Specifications 4 2. Antenna Characteristics 5 3. Radiation Patterns 7 4. Mechanical Drawing 9 5. Packaging 10 Changelog 11 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. SPE-12-8-090/B/WY www.taoglas.com 2 1. Introduction 1. Introduction 1. Introduction 1. Introduction 1. Introduction The FW.92 is a flexible cellular whip antenna with IP65 housing and an RP-N-type male connector. It has a wide response and high peak gain. It is ideal for outdoor environments which require high gain on both lower and upper bands. It's unique characteristic is it has stable above 3dBi peak gain on all five common 2G/3G 1. 1. GSM/CDMA cellular bands used worldwide (when attached to a 30cm*30cm metal plate). The antenna Introduction radiates best attached to a metal plate but it can still perform without as evidenced by the table below. This antenna delivers wider coverage areas and more reliable connections for professional customers in the Introduction automotive and industrial sectors. The whip is made up of a flexible inner steel core covered by TPU so extremely resistant to collisions and maintaining its original shape and RF performance. 1. Introduction Customized frequency and gain versions can be supplied. SPE-12-8-090/B/WY www.taoglas.com 3 2. Specifications 3. Antenna Characteristics2. Frequency (MHz) CELLULAR Specifications 824~896 880~960 1710~1880 1850~1990 1710~2170 -0.1 3.0 3.3 3.3 3.4 3.9 4.0 4.0 -3.4 -2.3 -1.9 -1.9 -2.0 -1.5 -1.4 46% 59% 65% 65% 61% 63% 71% 72% Peak Gain (dBi) 3. Free Space -0.2 Antenna Characteristics With Ground plane(30x30cm) 3.3 Average Gain (dBi) Free Space 4. -3.8 Antenna Radiation Patterns3.Antenna With Ground plane(30x30cm) -1.2 -2.1 Characteristics2. Free Space Specifications 41% With Ground plane(30x30cm) 3. 3. 70% Impedance Efficiency 50Ω Antenna Characteristics2. Polarization Specifications Linear Radiation Pattern Omni Input Power 50 W Tested Power Antenna Characteristics 10 W Mechanical 4. Dimensions Height 274 ± 5 mm Base Diameter 20 ± 0.1 mm Antenna Radiation Patterns3.Antenna 4 ± 0.2 mm Whip Diameter Casing Characteristics ABS Connector RP-N-type Male Environmental Temperature Range -40°C to 85°C Humidity Non-condensing 65°C 95% RH 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns3.Antenna Characteristics 4. Antenna Radiation Patterns3.Antenna Characteristics2. SPE-12-8-090/B/WY Specifications www.taoglas.com 4 3. Antenna Characteristics 4. Antenna Radiation Patterns3.Antenna 3.1 Return Loss Characteristics 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns3.Antenna Characteristics 4. Antenna Radiation Patterns3.Antenna Characteristics 3.2 Efficiency 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns3.Antenna Characteristics 4. Antenna Radiation Patterns3.Antenna SPE-12-8-090/B/WY www.taoglas.com 5 3.3 Peak Gain 3.4 Average Gain SPE-12-8-090/B/WY www.taoglas.com 6 4. Radiation Patterns 4. 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns X 4. Antenna Radiation Patterns 4. Antenna Radiation Patterns XY Plane 4.1 Antenna Free Space Y Z X 4. XZ Plane X Antenna Radiation Patterns Z Y 4. Antenna Radiation Patterns X X Y SPE-12-8-090/B/WY Z www.taoglas.com 7 4.2 Antenna on Ground plane (30X30cm) Y Z X XY Plane XZ Plane X X Z Y SPE-12-8-090/B/WY www.taoglas.com 8 5. Mechanical Drawing (Units: mm) 6. Packaging5. 6. Packaging 7. Application Note6. Packaging5. Mechanical Drawing Mechanical Drawing 6. Packaging5. Mechanical Drawing 6. Packaging 7. Application Note6. Packaging 7. Application Note 7. Application Note6. Packaging 7. Application Note6. Packaging5. Mechanical Drawing 6. Packaging5. SPE-12-8-090/B/WY Mechanical Drawing www.taoglas.com 9 6. Packaging 6. Packaging5. 6. Packaging 7. Application Note6. Packaging5. Mechanical Drawing Mechanical Drawing 6. Packaging5. Mechanical Drawing 6. Packaging 7. Application Note6. Packaging 7. Application Note 7. Application Note6. Packaging 7. Application Note6. Packaging5. Mechanical Drawing 6. Packaging5. SPE-12-8-090/B/WY Mechanical Drawing www.taoglas.com 10 Changelog for the datasheet SPE-12-8-090 - FW.92.RNT.M Revision: B Date: Changes: Changes Made by: 2019-08-16 Updated to new format Dan Cantwell Previous Revisions Revision: A (Original First Release) Date: Notes: Author: SPE-12-8-090/B/WY 2012-07-17 SS www.taoglas.com 11 www.taoglas.com SPE-12-8-090/B/WY © Taoglas www.taoglas.com 12