HRFC-AT1S-B05A(60)

SC FC Type Fixed Attenuators ■Features 1. FC Type :Comply with IEC 61754-13 (JIS C 5970) 2. Maximum input power for SM :250mW FC 3. Polishing Type : AdPC(SM), PC(GI) Notice: Plug key width: 2.1mm Jack key width: 2.2mm ■Applications MU Nov.1.2022 Oct.1.2021 Copyright Copyright 2021 2022 HIROSE HIROSE ELECTRIC ELECTRIC CO., CO., LTD. LTD. All All Rights Rights Reserved. Reserved. Harsh 4. Dual wavelength (SM): 1310nm and 1550nm n i t n d e u Environment Power level adjustment of optical fiber communication networks. Max. Input Power ed Mechanical Characteristis Optical Characteristis Attenuators Terminators h c S Attenuation Return Loss e l u -25°C to +70°C Storage temperature range Single mode : 250mW Multi mode : 10mW Test Method Wavelength 1310±30nm Wavelength 1550±30nm Wavelength 1310±30nm Wavelength 1550±30nm Adapter gauge holding force Zirconia gauge of 2.499 ±0.0005 mm diameter. Durability (cycles, mating/unmating) 500 times Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 acceleration of 98.1m/s , 3 hours in each of the 3 axis. Shock Environmental Characteristis b o t d Operating temperature range Item POF / PCF d e ■Product Specification (For Single mode /For Multi mode) Ratings 86 o c is Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 3 cycles in each of the 3 axis. Composite temperrature -Humidity cyclic test Humidity : 90% to 96% Temperature : -10℃ to 65℃ , Time : 240 hours(10 Cycles) Change of temperature Temperature : -25℃ to +70℃ , 100 cycles, Dry heat 500 hours at +85°C Cold 500 hours at -25°C Salt mist 48 hours in a 5% concentration of salt mist -25°C to +85°C Single mode :SM Fiber type Multi mode:GI-50/125 Specifications For Single mode See the attenuation table on the next page ≧ 40dB(AdPC) 2 to 3.9N For Multi mode Attenuation ±1.5dB ≧ 22dB(PC) 2 to 5.9N 1) Meets Attenuation/Return Loss requirements. 2) No visible dislocation of clamp or cable. No significant corrosion. In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information. FC Type Fixed Attenuators ■Materials For Single mode For Multi mode Coupling Copper alloy Body Stainless steel Ferrule SC Material Part Zirconia Split sleeve Zirconia Phosphor Bronze FC ■FC Type Fixed Attenuator Ø10 FC- n i t n (HRFC-AT11K~)30 (HRFC-AT1S~)27.8 CL No. Attenuation CL820-8001-7-60 1dB HRFC-AT11K-A02(60) CL820-8002-0-60 2dB HRFC-AT11K-A03(60) CL820-8003-2-60 3dB HRFC-AT11K-A04(60) CL820-8004-5-60 4dB HRFC-AT11K-A05(60) CL820-8005-8-60 5dB HRFC-AT11K-A06(60) CL820-8006-0-60 6dB HRFC-AT11K-A07(60) CL820-8007-3-60 7dB HRFC-AT11K-A08(60) CL820-8008-6-60 8dB HRFC-AT11K-A09(60) CL820-8009-9-60 9dB CL820-8010-8-60 10dB CL820-8011-0-60 15dB CL820-8012-3-60 20dB CL820-8013-6-60 25dB ed HRFC-AT11K-A10(60) HRFC-AT11K-A15(60) ch HRFC-AT11K-A20(60) S HRFC-AT11K-A25(60) Attenuation Tolerance d e ± 0.5dB b o ± 0.6dB t d e l u Return Loss ≥40dB ± 10% Wavelength Split sleeve Fiber type Label color Zirconia SM Mauve Split sleeve Fiber type Label color GI-50/125 Yellow 1310nm & 1550nm Attenuators Part Number HRFC-AT11K-A01(60) Harsh Environment o c is For Single mode（AdPC Polishing type，Maximum input power :250mW) d e u MU ± 1.5dB For Multi mode（PC Polishing type, Maximum input power 10mW）  Part Number CL No. Attenuation HRFC-AT1S-B05A(60) 820-0063-0-60 5dB HRFC-AT1S-B10A(60) 820-0064-3-60 10dB HRFC-AT1S-B15A(60) 820-0065-6-60 15dB HRFC-AT1S-B20A(60) 820-0066-9-60 20dB Attenuation Tolerance Return Loss Wavelength ± 1.5dB ≥22dB 1310nm Phosphor Bronze Terminators Nov.1.2022 Oct.1.2021 Copyright Copyright 2021 2022 HIROSE HIROSE ELECTRIC ELECTRIC CO., CO., LTD. LTD. All All Rights Rights Reserved. Reserved. M8×0.75 POF / PCF 87